DSpace Collection:http://hdl.handle.net/2445/476472024-03-29T06:01:48Z2024-03-29T06:01:48ZEstudi neotectònic de l’àrea font dels sismes d’Os de CivísMartín Castells, Janahttp://hdl.handle.net/2445/2017162024-03-12T17:02:13Z2023-09-06T10:39:37ZTitle: Estudi neotectònic de l’àrea font dels sismes d’Os de Civís
Author: Martín Castells, Jana
Abstract: Since 1st February 2021 there have been more than 630 earthquakes in the surroundings of Os de Civís (Alt Urgell, Spain), two of them reaching magnitudes up to Ml=3.8 and Ml=3.6. The absence of destructive earthquakes in the historic and instrumental record is reflected by the lack of neotectonics studies in this area, so the earthquakes source is unknown. However, the evidence of active faults close (<50km) to the study area and the trace of an E-W alpine thrust (Estaron thrust) crossing it, suggest that there could be a connection between the structure and the earthquakes.
This study sets out two objectives to identify the seismic source of the earthquakes. On one hand, it is proposed to relocate the earthquakes available in the ICGC’s catalogue by using NonLinLoc, a non-linear location algorithm that provides reliable and complete solutions. The obtained locations would contribute to the knowledge of the seismic source in depth and also to enclose the study area. On the other hand, it is intended to elaborate a neotectonics map, considering elements and materials both affected or generated by tectonic deformation. This would allow to suggest a possible relation between the registered seismicity and its source.
The obtained earthquake locations define an ESE dipping region that has been related to two NE-SW faults, interpreted as reactivated branches of the Estaron thrust. No unequivocal superficial rupture has been identified in the neotectonics study, but some displacement indicators have been seen in La Ginebrera region, as well as a scarp up to 35 m in the south slope of Bony de Trescull. The latter has been interpreted as a possible old rupture of another segment of the branch.
The present study has been a first approach to the area. More investigation is need to be done, so different methods and studies are proposed for future research.
Note: Màster Oficial en Recursos Minerals i Riscos Geològics, Universitat de Barcelona - Universitat Autònoma de Barcelona, Facultat de Ciències de la Terra. Curs: 2022-2023. Tutor: Anna Echeverría, Tànit Frontera i María Ortuño2023-09-06T10:39:37ZNuevos datos paleosísmicos para la caracterización de un transecto completo en la Falla de Alhama de Murcia (SE España).Ollé López, Marchttp://hdl.handle.net/2445/1887232024-03-12T17:02:13Z2022-09-06T10:10:28ZTitle: Nuevos datos paleosísmicos para la caracterización de un transecto completo en la Falla de Alhama de Murcia (SE España).
Author: Ollé López, Marc
Abstract: La Falla de Alhama de Murcia (FAM) es una de las principales fallas sismogénicas de la Zona de Cizalla de las Béticas Orientales (EBSZ). Entre Lorca y Totana, la falla se bifurca en múltiples ramas que se considera que se unen en profundidad y, por tanto, cada una tiene su propia contribución en cuanto a la historia sísmica y la tasa de deslizamiento de la falla principal. Un trabajo previo estudió la actividad de la falla realizando un análisis paleosísmico en cuatro de las cinco ramas más importantes de este sector y, por tanto, produciendo el primer transecto paleosísmico en la zona. Sin embargo, una rama adicional no se incluyó en el transecto debido a la falta de sitios paleosísmicos adecuados: la N2a-AMF. Este trabajo se ha centrado en esta rama
inexplorada para analizar su potencial sísmico y obtener nuevos datos que permitan completar el transecto paleosísmico realizado previamente en esta zona (El Saltador-La Hoya), con el objetivo de contribuir a generar un modelo de peligrosidad sísmica más realista en la región. Realizamos un estudio geomorfológico detallado para mapear con precisión la N2a-AMF y seleccionar una ubicación adecuada para la excavación de una trinchera paleosísmica. También refinamos el mapeo de N2b-AMF (ya analizada en el estudio previo) para comprender mejor la relación entre ambas ramas y el push-up que delimitan. En la nueva trinchera, observamos evidencias sólidas de deformación recurrente (un mínimo de tres eventos morfogenéticos) en los sedimentos del Pleistoceno superior, lo que implica que N2a-AMF ha tenido actividad al menos durante ese
periodo (dataciones en curso). Estos eventos habrían tenido lugar en el intervalo de tiempo estimado entre 82,4 ka y 39,2 ka, presentando una recurrencia mínima de 14,4 ka. Además, calculamos una tasa de desplazamiento vertical mínima de entre 0,010 y 0,011 mm/año para los últimos 82,4 ka.
Note: Màster Oficial en Recursos Minerals i Riscos Geològics, Universitat de Barcelona - Universitat Autònoma de Barcelona, Facultat de Geologia. Curs: 2021-2022. Tutors: Eulàlia Masana Closa i Octavi Gómez Novell2022-09-06T10:10:28ZLa conca alta del Francolí i els seus molins: reconstrucció hidràulica de crescudes extraordinàries per l'anàlisi de freqüències dels cabals de crescudaPoll Barrera, Laurahttp://hdl.handle.net/2445/1801942024-03-12T17:02:13Z2021-09-22T07:38:26ZTitle: La conca alta del Francolí i els seus molins: reconstrucció hidràulica de crescudes extraordinàries per l'anàlisi de freqüències dels cabals de crescuda
Author: Poll Barrera, Laura
Abstract: [cat] Al llarg del darrer segle i mig la conca alta del riu Francolí ha estat afectada per quatre grans riuades
de tipus flash flood. Aquestes riuades històriques han causat un gran nombre de danys materials i
pèrdues de vides humanes. Aquest estudi pretén aportar coneixement sobre la freqüència i cabals
amb què es produeixen aquestes riuades, útil per fer els mapes de perillositat i risc necessaris per a la
planificació i gestió del territori.
S’ha fet una recerca a la zona dels molins i limnimaques que s’hi troben a través de fonts
bibliogràfiques i dades de camp. S’ha seleccionat i estudiat un tram on se situa el Molí del Celdoni i se
n’ha reconstruït els cabals pic de les dues riuades més recents (1994 i 2019) utilitzant el software lliure
Iber com a model hidràulic. Finalment s’ha recalculat els períodes de retorn tenint en compte les dades
dels cabals sistemàtiques (aforaments) i no sistemàtiques (reconstruïts de les limnimarques
històriques) per a períodes de retorn de baixa freqüència.
Els resultats han estat per una banda una base de dades georeferenciada dels molins i les
limnimarques que se situen a la capçalera de la conca del Francolí. Per l’altra banda, s’han estimat
cabals pic de 380 m3/s per la riuada del 1994 amb un període de retorn inferior a 50 anys, d’acord
amb l’anàlisi de freqüència. En canvi, per la riuada del 2019 s’han estimat cabals de 780 m3/s i
corresponents a un període de retorn d’entre 50 i 100 anys. Aquest estudi mostra la importància de
tenir en compte les dades no sistemàtiques, ja que i) redueixen els períodes de retorn i, ii) fan
multiplicar per 8 els cabals obtinguts només amb dades sistemàtiques per els mateixos períodes de
retorn.; [eng] Over the last century and a half, the upper Francolí river basin has been affected by four flash floods.
These historical floods caused a large material damage and loss of human life. This study aims to
provide knowledge about the flood occurrence, their frequencies and their peak flows. These are key
data for hazard and risk mapping, needed for land use planning and management.
We carried out a research of the mills and flood water marks within the study area by means of a
bibliographic review and field data. A reach that includes the Molí del Celdoni was selected and
studied. We have been able to reconstruct the peak flows of the two most recent floods (1994 and
2019) using the open source Iber software. Finally, the return periods have been recalculated taking
into account the data of systematic (gauging data) and non-systematic flows (reconstructed from the
historical marks) for long return periods.
The results have been, first, a georeferenced database of the mills and flood water marks located at
the head of the Francolí basin. Second, peak flows of 380 m3/s were estimated for the 1994 flood,
with a return period <50 years according to the frequency analysis. Contrastingly, for the 2019 flood
we estimated flows of 780 m3/s with a corresponding return period between 50-100 years. This study
highlights the importance of considering non-systematic data, because i) they reduce return periods
and, ii) they increase 8 times the peak flows obtained only with systematic data for the same return
periods.
Note: Màster Oficial en Recursos Minerals i Riscos Geològics, Universitat de Barcelona - Universitat Autònoma de Barcelona, Facultat de Geologia. Curs: 2020-2021. Tutora: Glòria Furdada Bellavista. Cotutors: Jordi Tuset Mestre i J. Carles Balasch Solanes2021-09-22T07:38:26ZGestió d'una xarxa sísmica en temps real localitzada al Pirineu Oriental (La Cerdanya): relocalització hipocentral del període desembre 2019 - juny 2020 i anàlisis sismotectònicCanari Bordoy, Ariadnahttp://hdl.handle.net/2445/1730292024-03-12T17:02:13Z2021-01-05T12:21:02ZTitle: Gestió d'una xarxa sísmica en temps real localitzada al Pirineu Oriental (La Cerdanya): relocalització hipocentral del període desembre 2019 - juny 2020 i anàlisis sismotectònic
Author: Canari Bordoy, Ariadna
Abstract: Seismicity in the Eastern Pyrenees has shown moderate and diffuse over time. Although, there is evidence of catastrophic historical earthquakes and some of the events in the last decade that have caused considerable damage. This work shows the feasibility to obtain seismic data of best quality in the temporary seismic network installed on Cerdanya Neogene basin. The network has recorded local events that are added to the permanent seismic networks of the ICGC, IGN and RéNaSS distributed region, for the period between December of 2019 and June 2020. Seismic data processing has been performed using the Seiscomp3 seismological software package. A cortical velocity model has been created to improve the accuracy of the location, adjusted to the geology of the Cerdanya basin and the region around it. The catalogue contains 641 seismic events and 251 quarry blasts. The results of the study show that the locations of earthquakes have higher resolution (with vertical errors as low 1 km) in the Cerdanya when including the temporary network as a result of a denser network in this area. Also, it shows that seismicity of Eastern Pyrenees is concentrated in the north and easternmore areas. The recorded data has allowed to discuss the seismotectonic of the Cerdanya, Selva and Fenollet areas, where 202, 158 and 54 earthquakes have been identified, respectively. The hypocentres are distributed in depth from to surface to a maximum of 16 km. In particular, two areas show lineaments that could be related to individual structures: At Meranges (Cerdanya), the events could be grouped in two to three fault planes (dipping NW and SE) perpendicular to Cerdanya fault. In Santa Coloma, (Selva), the network has recorded a seismic cluster (main event 4,2 magnitude) that seems to follow a SE dipping structure. As showed in this study, seismic data in larger periods of time using temporary network could be key for improving the seismotectonic knowledge in some target seismic regions, benefiting the seismic hazard evaluation.
Note: Màster Oficial en Recursos Minerals i Riscos Geològics, Universitat de Barcelona - Universitat Autònoma de Barcelona, Facultat de Geologia. Curs: 2019-2020. Tutor: Mario Ruíz i Cotutora: María Ortuño2021-01-05T12:21:02ZReconstrucción del alud de febrero de 2018 en la carretera BV-4024, Coll de Pal, y definición y caracterización del correspondiente escenario de referencia de T100.Andrade Fuentes, Carlos Albertohttp://hdl.handle.net/2445/1462782024-03-12T17:02:13Z2019-12-09T10:08:23ZTitle: Reconstrucción del alud de febrero de 2018 en la carretera BV-4024, Coll de Pal, y definición y caracterización del correspondiente escenario de referencia de T100.
Author: Andrade Fuentes, Carlos Alberto
Abstract: [eng] In mountain areas, natural phenomena such as avalanches generate risk when they affect infrastructures. On February 10, 2018, a wind slab avalanche triggered from an unknown release area, occurred within the “Zona de Alud RIT051”, which caused the temporary closure of the BV-4024 local road, on Coll de Pal, Catalonia, and therefore avoiding damage to vehicles in transit and their passengers. In order to facilitate a future risk management associated to the RIT051 avalanche, a 2-D simulation of the February 2018 snow avalanche and its T100 reference scenario was carried out. The snow avalanche module of free software IBER 2.5, still in development, was used. The February 2018 snow avalanche simulation was based on the analysis of the Allaus Control field data, the interpretation of 13 possible release zones and a nivological and meteorological analysis to determinate the return period (T). Despite of the simulation of the February 2018 avalanche was not completely successful on reconstructing the snow avalanche path and run-out zone, the results were considered consistent with recent damage to vegetation and representative of the event. The February 2018 snow avalanche was classified by a Size 2 (Canadian Snow Avalanche Size-Classification System) and would have a T among 15 and 20 years. The T100 snow avalanche simulation, designed and calibrated based on the February 2018 snow avalanche, set up a snow avalanche that, in its dense phase, would reach a maximum width and run-out distance of 115 and 594 m; respectively. The T100 snow avalanche would carry to 8140 m3 and reach a maximum speed of 25 m/s, just as the head reaches the BV-4024 local road, impacting with a dynamic pressure among 93.75 to 187.50 kPa. The T100 snow avalanche was classified by a Size 3, could be able to bury a car, destroy a small building or break trees. Measures such as snowpack-stabilizing and snowdrift control structures or avalanche guiding and deflecting structures can be considered, based on the present work, for future risk management. The simulation of both snow avalanches did not incorporate the existence of a less cohesive phase (powder component).; [spa] En áreas de montaña, los fenómenos naturales como los aludes generan riesgo cuando afectan infraestructuras. El pasado 10 de febrero de 2018 se produjo un alud de placa de viento, de zona de salida desconocida, dentro de la Zona de Alud RIT051; el cual no causó daños gracias al cierre temporal preventivo de la carretera BV-4024, en su paso por Coll de Pal, Cataluña. Con tal de posibilitar una futura gestión del riesgo asociada a la activación de la RIT051, se generó la simulación 2-D del alud de febrero de 2018 y de su escenario de referencia de T100, mediante el uso del módulo de aludes, en desarrollo, del free software IBER 2.5. La simulación consideró información levantada en terreno por Allaus Control, la interpretación de 13 posibles zonas de salida y un análisis nivometeorológico para determinar su periodo de retorno (T). Si bien la simulación del alud de febrero de 2018 no logró reconstruir fielmente el recorrido y depósito del alud, los resultados fueron considerados consistentes y representativos del evento, destacando su coherencia con daños recientes en la vegetación. Este alud fue clasificado con un Tamaño 2 (Canadian Snow Avalanche Size-Classification System), y tendría un T de entre 15 a 20 años. La simulación del alud T100, diseñada y calibrada en base al alud de feb de 2018, muestra un alud de nieve que, en su fase densa, lograría un ancho y alcance máximo de 115 y 594 m; respectivamente. El alud T100 movilizaría hasta 8140 m3 y podría alcanzar una velocidad máxima de 25 m/s, justo cuando la cabecera llega a la carretera BV-4024, impactando con una presión dinámica de entre 93.75 a 187.50 kPa. El alud T100 fue clasificado con un Tamaño 3, pudiendo enterrar un auto, destruir un pequeño edificio o romper árboles. Medidas cómo la retención del manto nivoso o el desvío, freno o parada del alud, pueden ser consideradas, a partir de este estudio, para una futura gestión del riesgo. La simulación de ambos aludes no consideró la existencia de una fase menos cohesiva (aerosol).
Note: Màster Oficial en Recursos Minerals i Riscos Geològics, Universitat de Barcelona - Universitat Autònoma de Barcelona, Facultat de Geologia, Curs: 2018-2019, Tutorsr: Pere Oller Figueras i Glòria Furdada Bellavista.2019-12-09T10:08:23ZEstudio de los mecanismos que controlan la transición explosiva a efusiva de las erupciones de domo del complejo Teide-Pico Viejo.Dorado García, Olayahttp://hdl.handle.net/2445/1418022024-03-12T17:02:13Z2019-10-07T10:56:49ZTitle: Estudio de los mecanismos que controlan la transición explosiva a efusiva de las erupciones de domo del complejo Teide-Pico Viejo.
Author: Dorado García, Olaya
Abstract: The Teide-Pico Viejo (PT-PV) stratovolcanoes constitute one of the major potentially active volcanic
complexes in Europe. Traditionally, they have been considered to be non-explosive but recent studies
have revealed that explosive activity of phonolitic magmas, including plinian and subplinian eruptions
and generation of pyroclastic density currents, have also been significant. This explosive activity is
mostly related to satellite dome vents, like the one studied in this work, Pico Cabras. Dome-forming
eruptions usually present sudden transitions between explosive and effusive activity. A better knowledge
of this type of eruptions and the main factors that controls these changes in eruptive styles are required
to undertake a comprehensive volcanic hazard assessment of Tenerife Island. In this study, we conduct a
petrological and mineral characterization of the different eruption phases of Pico Cabras with the aim of
identifying the factors that control these changes in the volcanic activity. Using geothermobarometers,
geohygrometers and comparing the results with experimental petrology data we present a model of a
compositionally stratified magma chamber at 1 kbar±0.5kbar in which the differences in the eruptive
styles are controled by the temperature and the amount of volatiles dissolved in the melt. The explosive
phase is related to the upper part of the magma chamber at 725ºC±25ºC and 3,5-5 wt% H2O and the
effusive phase with the main body of the chamber at 880ºC±30ºC and 2,5-3 wt% H2O. Also, we report
for the first time the present of sodalite, a Cl-rich mineral, in recent PT-PV magmas. This mineral is
an indicator of a significant amount of halogen gases within the fluid phase. The release of this kind of
volatiles into the atmosphere (specially Cl and Br) have a direct impact on the ozone layer depletion.
Note: Màster Oficial en Recursos Minerals i Riscos Geològics, Universitat de Barcelona - Universitat Autònoma de Barcelona, Facultat de Geologia. Curso: 2018-2019. Tutors: Joan Martí Molist y Adelina Geyer Traver2019-10-07T10:56:49ZAnálisis de límites de detección y cálculo de volumen de desprendimientos en escarpes rocosos mediante datos LiDAR y fotogramétricosMontaño Quintero, Maria Elenahttp://hdl.handle.net/2445/1396672024-03-12T17:02:13Z2019-09-09T12:58:30ZTitle: Análisis de límites de detección y cálculo de volumen de desprendimientos en escarpes rocosos mediante datos LiDAR y fotogramétricos
Author: Montaño Quintero, Maria Elena
Abstract: [eng] This paper presents an analysis of the limits of detection and calculation of volume of rockfalls, through the use of LiDAR and photogrammetry. Also, part of the study, focuses on the comparison of two different instruments for the acquisition of photogrammetric data. The pilot study area is located at the Puigcercós cliff (Pallars Jussà). The behavior of this cliff, has been widely studied in preliminary investigations through the use of LiDAR technology. However, one of the limitations of this technique is the high cost of acquiring and processing the data and the temporary restrictions that this implies. The use of photogrammetry in this type of research, is not widely developed, however, offers the possibility of data acquisition at a much lower cost than the LiDAR. For this reason, it is to be determined the cost-benefit ratio of this technique, taking into account the high precision of the results obtained with LiDAR technology. For the analysis of the information, it is carried out: 1) Sensitivity analysis and 2) Quantitative analysis of the volumes of the rockfalls identified by means of the analysis of data acquired in different dates (2018 vs 2019). Through the observed results and the analysis of the calculations of volumes the rockfalls with photogrammetry, it is obtained that this technique provides results comparable to those obtained by LiDAR technology. Additionally, it is found that the use of better resolution photographic cameras for photogrammetry, does not necessarily imply contribution to a better definition of the geometries for the creation of optimum quality point clouds.; [spa] Este trabajo presenta un análisis de los límites de detección y cálculo de volúmenes de desprendimientos de rocas, mediante el uso de LiDAR y fotogrametría. También, parte del estudio, se centra en la comparación de dos diferentes instrumentos de adquisición de los datos fotogramétricos. El área de estudio se localiza en el Escarpe de Puigcercós (Pallars Jussà). La dinámica de este escarpe, ha sido ampliamente estudiada en investigaciones preliminares mediante el uso de tecnología LiDAR. Sin embargo, una de las limitaciones de esta técnica, es el alto coste de adquisición y tratamiento de los datos y las restricciones temporales que eso implica. La implementación de fotogrametría en este tipo de investigaciones, no se encuentra ampliamente desarrollada, sin embargo, ofrece la posibilidad de adquisición de datos a un coste mucho más bajo que el LiDAR. Por tal razón, se desea determinar la relación coste-beneficio de esta técnica, teniendo en cuenta las altas precisiones de los resultados obtenidos con tecnología LiDAR. Para el análisis de la información, se realiza: 1) Análisis de sensibilidad y 2) Análisis cuantitativo de volúmenes de los desprendimientos, identificados por medio del análisis de datos adquiridos en diferentes fechas (2018 vs 2019). Por medio de los resultados observados y del análisis de los cálculos de volúmenes de desprendimientos con fotogrametría, se obtiene que esta técnica aporta resultados equiparables a los que se obtienen por medio de tecnología LiDAR. Adicionalmente, se encuentra que el uso de cámaras fotográficas de mejor resolución para la fotogrametría, no implica necesariamente, aporte a una mejor definición de las geometrías para la creación de nubes de puntos de calidad óptima.
Note: Màster Oficial en Recursos Minerals i Riscos Geològics, Universitat de Barcelona - Universitat Autònoma de Barcelona, Facultat de Geologia, Curs: 2018-2019, Tutors: Xabier Blanch i Marta Guinau2019-09-09T12:58:30ZÁreas fuente de polvo desértico e impacto en la mortalidad en Ahvaz, SW de IránGonzalez Romero, Adolfohttp://hdl.handle.net/2445/1380782024-03-12T17:02:13Z2019-07-24T08:14:42ZTitle: Áreas fuente de polvo desértico e impacto en la mortalidad en Ahvaz, SW de Irán
Author: Gonzalez Romero, Adolfo
Abstract: [eng] The city of Ahvaz is located in the SW of Iran and is considered one of the most polluted cities in the world by the World Health Organization. One of the causes is desert dust. The city is affected by desert dust from hot spot areas, such as Sahara, Sahel, the basins of Al-Batin, Al-Sahba, Al-Rimah, Tigris and Euphrates basins. The effect of atmospheric particulate matter (PM10 and PM2.5) on health has been studied in multiple articles throughout Europe, Asia and North America, but in Middle East and Africa are scarce. Accordingly, we aim at evaluating this effect in the city of Ahvaz.
Data provided by the Department of Environmental and Occupational Hazards Control Research Center shows that the average levels of PM10 and PM2.5 reach 127 and 48 μg/m3 (2015-2018) and 96 and 94 % of the days exceed 50 and 25 μg/m3 for PM10 and PM2.5.
After calculating the daily air mass back-trajectories reaching Ahvaz in the study period, and applying a cluster analysis, we were able to identify six dominant air mass transport trajectories (cluster) and the most common originates on the border between Syria and Iraq, followed by Saudi Arabia, Eastern Europe, Egypt, Algeria and Atlantic. The averaged levels of PM10, PM2.5 and PM10-PM2.5 (coarse fraction) for each cluster are very similar, which indicates that the major contribution of PM to the city is due to the closest source areas (independently of the cluster). The risk of daily mortality increases for each daily increment of 10 μg/m3 PM and is different for every cluster, with an increase from 0.5 to 2% (95% CI) for PM10, and from 0.8 to 2.7% (95% CI) for the coarse fraction, while for PM2.5 the effect is not statistically significant. The back-trajectories from Algeria and Egypt, that cross the region of Al-Basra, with high desert dust emissions and high anthropogenic pollution, are those having the greatest impact on mortality risk.; [cat] La ciutat d’Ahvaz es situa al SW d’Irán i es catalogada com una de les ciutats més contaminades del planeta per la Organització Mundial de la Salut. Una de les causes és la pols desèrtica. La ciutat es veu afectada per aquesta, procedent de zones com el Sàhara, Sahel, les conques de Al-Batin, Al-Sahba, Al-Rimah, Tigris i Èufrates. L’efecte de la matèria particulada atmosfèrica (PM10 y PM2.5) a la salut s’ha estudiat en múltiples articles en tota Europa, Asia i América del Nord, però a l’Orient Mitjà i l’Àfrica son escassos. Per aquest fet, el nostre objectiu es avaluar aquest efecte a la ciutat d’Ahvaz.
Les dades proporcionades per el Department of Environmental and Occupational Hazards Control Research Center mostren que els nivells intermedis de PM10 y PM2.5 assoleixen 127 y 48 μg/m3 (2015-2018) y el 96 y 94% dels dies excedeixen 50 y 25 μg/m3 per PM10 y PM2.5.
Després de calcular les retro-trajectòries diàries de masses d’aire que arriben a Ahvaz en el període d’estudi i aplicar un anàlisi de clústers, podem identificar sis retro-trajectòries de transport dominants (clústers) i el més comú s’origina a la frontera entre Síria e Iraq, seguit d’Aràbia Saudí, Europa de l’Est, Egipte, Argelia i Atlàntic. Els nivells intermedis de PM10, PM2.5 y PM10-PM2.5 (fracció grollera) per cada clúster són molt similars, indicant que la major contribució de PM a la ciutat es degut a les àrees font més properes (independentment del clúster). El risc de mortalitat diària augmenta amb cada increment de 10 μg/m3 de PM i es diferent per cada clúster amb un augment de 0.5 a 2% (IC 95%) per PM10 i de 0.8 a 2.7% (IC 95%) per la fracció grollera, mentre que per al PM2.5 l’efecte no es estadísticament significatiu. Les retro-trajectòries d’Argelia i Egipte, que creuen la regió de Al-Basora, amb altes emissions de pols desèrtica i alta contaminació antropogènica, son les que tenen un major impacte en el risc de mortalitat.; [spa] La ciudad de Ahvaz se encuentra en el SW de Irán y está considerada como una de las ciudades más contaminadas del mundo por la Organización Mundial de la Salud. Una de las causas es el polvo desértico. La ciudad se ve afectada por este, procedente de zonas como el Sahara, el Sahel, las cuencas de Al-Batin, Al-Sahba, Al-Rimah, Tigris y Éufrates. El efecto de la materia particulada atmosférica (PM10 y PM2.5) en la salud se ha estudiado en múltiples artículos en toda Europa, Asia y América del Norte, pero en Oriente Medio y África son escasos. En consecuencia, nuestro objetivo es evaluar este efecto en la ciudad de Ahvaz.
Los datos proporcionados por el Department of Environmental and Occupational Hazards Control Research Center muestran que los niveles promedio de PM10 y PM2.5 alcanzan 127 y 48 μg/m3 (2015-2018) y el 96 y 94% de los días exceden 50 y 25 μg/m3 para PM10 y PM2.5.
Después de calcular las retro-trayectorias diarias de masas de aire que llegan a Ahvaz en el período de estudio y aplicar un análisis de clústeres, pudimos identificar seis retro-trayectorias de transporte dominantes (clústeres) y las más comunes se originan en la frontera entre Siria e Irak seguido por Arabia Saudí Europa del Este, Egipto, Argelia y Atlántico. Los niveles promedios de PM10, PM2.5 y PM10-PM2.5 (fracción gruesa) para cada clúster son muy similares, lo que indica que la mayor contribución de PM a la ciudad se debe a las áreas fuente más cercanas (independientemente del clúster). El riesgo de mortalidad diaria aumenta con cada incremento diario de 10 μg/m3 de PM y es diferente para cada grupo, con un aumento de 0.5 a 2% (IC 95%) para PM10 y de 0.8 a 2.7% (IC 95%) para la fracción gruesa, mientras que para PM2.5 el efecto no es estadísticamente significativo. Las retro-trayectorias de Argelia y Egipto, que atraviesan la región de Al-Basora, con altas emisiones de polvo del desierto y alta contaminación antropogénica, son las que tienen el mayor impacto en el riesgo de mortalidad.
Note: Màster Oficial en Recursos Minerals i Riscos Geològics, Universitat de Barcelona - Universitat Autònoma de Barcelona, Facultat de Geologia, Curs: 2018-2019, Tutors: Xavier Querol Carceller i Joan Manuel Vilaplana Fernández2019-07-24T08:14:42ZMillora metodològica per a la detecció i caracterització de despreniments amb dades de LiDAR Terrestre a la Muntanya de MontserratGarcia Badal, Miquelhttp://hdl.handle.net/2445/1251302024-03-12T17:02:13Z2018-10-08T09:23:59ZTitle: Millora metodològica per a la detecció i caracterització de despreniments amb dades de LiDAR Terrestre a la Muntanya de Montserrat
Author: Garcia Badal, Miquel
Abstract: [eng] In this work we present the results obtained in the implementation of a methodological
improvement for the detection and characterization of rockfalls with Terrestrial LiDAR data in
the Muntanya de Montserrat (Catalonia).
The studies of detection of rockfalls with TLS carried out until now used a methodology with
the Polyworks program, but this one has some important limitations, that are explained in
detail in this work. The main constraint is the low accurate calculation of distances between
scans, which leads to erroneous distances especially in areas of fracture or surfaces with large
irregularities. The proposed new methodology (M3C2) consists of an algorithm that performs
the comparison between scans and calculates the mean distance taking into account some
neighbor points contained in a cylinder, which fit better with the real distance than with the
method described above.
The main objective of the work is to evaluate the implementation of the M3C2 tool with
CloudCompare for the analysis of Terrestrial LiDAR (TLS) data with which it is expected to
obtain an improvement in the detection, delimitation and calculation of volume of rockfalls on
the Degotalls Nord rock cliff in Muntanya de Montserrat.
The 93 rockfalls detected in this study highlight the permanent activity of rockfalls that occur
on the wall of Degotalls N in Montserrat. Of these rockfalls, 74,19% have a volume of less than
0,1 m3, and the 25,81% are blocks of larger volume, easily detectable with other
methodologies and even with visual inspection.
The comparison of the results obtained in this study with those obtained in previous works is
complex. In this work 55 rockfalls were detected which had not been detected in other studies.
In previous works 113 rockfalls were detected, of which only 38 were detected in this study. 75
rockfalls were not detected with the new method but after an accurate inspection of the
results they have been considered to be changes in vegetation rather than rockfalls. The
volume obtained for 82.06% of the rockfalls detected in this study and also in previous works is
higher than the volume previously obtained. The new method leads on a reduction in the
volume in only 17.94% of the detected rockfalls. 3 rockfalls with volumes lower than 0.001m3
were detected, which was the lowest volume detected in the previous studies. In this work the
lower threshold of detection was reduced to 0,0004 m3.; [cat] En aquest treball es presenten els resultats obtinguts en la implementació d’una millora
metodològica per a la detecció i caracterització de despreniments amb dades de LiDAR
Terrestre a la Muntanya de Montserrat (Catalunya).
Els estudis de detecció de despreniments amb TLS realitzats fins ara utilitzaven una
metodologia amb el programa Polyworks, però aquesta presentava un seguit de limitacions
importants, que s’expliquen en detall en aquest treball. La limitació més important rau en que
el càlcul de distancies entre escanejos no era precís i s’obtenien distàncies errònies en zones
de fractura o superfícies molt irregulars. La nova metodologia proposada (M3C2) consisteix en
un algoritme que realitza la comparació entre escanejos trobant la distància mitjana a partir de
la posició d’alguns punts veïns continguts dins d’un cilindre. Aquest procés permet obtenir una
distància entre escanejos que s’ajusta molt millor a la distància real.
El principal objectiu del treball és realitzar la valoració de l’aplicació de l’eina M3C2 amb
CloudCompare per a l’anàlisi de dades de LiDAR Terrestre (TLS) amb la qual s’espera obtenir
una millora en la detecció, delimitació i càlcul de volum de despreniments a la paret de
Degotalls Nord de la Muntanya de Montserrat.
Els 93 despreniments detectats en aquest estudi posen en rellevància l’activitat permanent de
despreniments que es produeixen a la paret de Degotalls N a Montserrat. D’aquests
despreniments un 74,19% presenta un volum inferior a 0,1 m3, l’altre 25,81 % són blocs de
volum superior, molt fàcilment detectables amb altres metodologies.
La comparació dels resultats obtinguts en aquest estudi amb els resultats d’altres treballs
previs a la zona d’estudi és complexa. En aquest treball s’han detectat 93 despreniments, 55
dels quals no havien estat detectats en altres estudis. Dels 113 despreniments detectats per
altres autors, en aquest estudi només se n’han detectat 38. Els altres 75 s’ha considerat que es
tractava de falsos despreniments en zones de vegetació. Pel que fa als volums detectats en
general hi ha un augment del volum, un 82,06% dels despreniments detectats tant en la
bibliografia com en aquest treball presenten un volum superior, i només un 17,94% presenten
una reducció del volum calculat, tot i així, s’han obtingut 3 despreniments d’un volum inferior
a 0,001m3, que era el mínim volum detectat fins ara. En aquest treball el llindar de detecció de
despreniments s’ha reduït a 0,0004 m3.
Note: Màster Oficial en Recursos Minerals i Riscos Geològics, Universitat de Barcelona - Universitat Autònoma de Barcelona, Facultat de Geologia, Curs: 2017-2018, Tutora: Marta Guinau Sellés, Cotutor: Xabier Blanch Gorriz2018-10-08T09:23:59ZPresent-day 3D GPS velocity field of the Iberian Peninsula and implications for seismic hazardPena Castellnou, Sarahttp://hdl.handle.net/2445/1245462024-03-12T17:02:13Z2018-09-14T07:58:57ZTitle: Present-day 3D GPS velocity field of the Iberian Peninsula and implications for seismic hazard
Author: Pena Castellnou, Sara
Abstract: [eng] We present a 3D crustal deformation velocity field of the Iberian Peninsula based on the analysis of more than 400 continuous GPS station data from the last 3.3 years (2015-2018 interval) distributed throughout the Iberian Peninsula, northern Africa and southern France. We describe the procedures followed to obtain a combined uniform velocity solution from daily GPS data using GAMIT/GLOBK software. Until now the previously published studies have estimated the 2D horizontal velocity field of the study area, since the vertical component is more complicated to derive. Only the studies by Serpelloni et al. (2013) and Nguyen et al. (2016) have calculated the vertical rates of deformation in some limited areas of the peninsula. In the present work, we provide the main results in terms of the velocity vectors in horizontal and up/down directions. The calculated GPS velocities range from 0.0 to 4.5 mm/yr, in Eurasia fixed reference frame, indicating that the Iberian Peninsula presents a heterogeneous present-day crustal deformation field, which can be grouped into 7 distinct domains/blocks. Each domain is influenced by the geo-tectonic structural configuration of the Iberian Peninsula and by the proximity to the Iberia-Nubia plate boundary. The highest velocities, as well as the highest geodetic strain rates, are detected in the EBSZ and along the Iberia-Nubia plate boundary, areas with the highest seismicity rates. The obtained vertical GPS velocities are preliminary and a processing of extended time-series (from 2010 to present) and more careful treatment of various phenomena affecting the GPS vertical signal (e.g. ocean and tide loading) should be performed in order to better resolve them. However, when the rates of observed vertical rates are high (>10 mm/yr), our results do indicate real motions, for example a subsidence of 6 cm/yr in Guadalentín basin, caused by the groundwater extraction. This kind of information is useful for multi-risk analysis since it can provide information of ongoing uplift/subsidence motion, that can be caused by faults, landslides, sediment settlement and/or anthropogenic activities (e.g. groundwater withdrawal, mining).; [cat] En aquest treball es presenta el camp de velocitats 3D de la Península Ibèrica basat en l’anàlisi de dades obtingudes durant 3,3 anys (des del 2015 al 2018) per més de 400 estacions contínues de GPS distribuïdes per tota la Península Ibèrica, nord d’Àfrica i sud de França, emprant el software GAMIT/GLOBK. Fins ara, tots els estudis geodèsics previs realitzats en la zona d’estudi han estimat el camp horitzontal de velocitats 2D sense calcular la component vertical a causa de la dificultat que suposa processar-la i obtenir-la. No obstant això, Serpelloni et al. (2013) i Nguyen et al. (2016) han derivat i obtingut diversos vectors de velocitat vertical en determinades àrees de la Península. Les velocitats horitzontals calculades en aquest treball varien d’entre 0,0 a 4,5 mm/any, en el sistema de referència que considera Euràsia com a placa fixa, indicant que la Península Ibèrica presenta un actual camp de velocitats heterogeni que pot ser agrupat en 7 dominis ben diferenciats. Cada domini està influenciat per la configuració geotectònica i estructural de la Península i per la proximitat al límit de plaques entre Ibèria i Núbia. Les velocitats més elevades, així com les àrees amb major deformació, es troben a l’EBSZ i al llarg del contacte entre Núbia i Ibèria, que són àrees amb elevada activitat sísmica. El camp de velocitats verticals GPS obtingut és preliminar; per tal de millorar-lo i obtenir una solució coherent és necessari el processament d’un període temporal més llarg (que inclogui més quantitat de dades) i tractar acuradament els diferents fenòmens que afecten la component vertical del senyal GPS (ex. marees i carrega oceànica). No obstant això, quan la taxa de deformació és elevada (>10 mm/any), els resultats obtinguts representen moviments reals; per exemple els 6 cm/anys de la taxa de subsidència a la conca del Guadalentín, causada per l’explotació d’aigua subterrània procedent de l’aqüífer. Aquest tipus d’informació es útil per anàlisis multirisc, proporcionant taxes d’aixecament/subsidència causada per l’activitat de falles, esllavissades, assentament del terreny i/o activitats antròpiques (ex. extracció d’aigua subterrània, mineria).
Note: Màster Oficial en Recursos Minerals i Riscos Geològics, Universitat de Barcelona - Universitat Autònoma de Barcelona, Facultat de Geologia, Curs: 2017-2018, Tutor: Giorgi Khazaradze2018-09-14T07:58:57Z