Please use this identifier to cite or link to this item: http://hdl.handle.net/2445/135664
Title: BaTi0.8B0.2O3 (B = Mn, Fe, Co, Cu) LNT Catalysts: effect of partial Ti substitution on NOx storage capacity
Author: Aldridge, Craig
Torregrosa-Rivero, Verónica
Albaladejo-Fuentes, Vicente
Sánchez Adsuar, María Salvadora
Illán Gómez, María José
Keywords: Catàlisi
Motors dièsel
Contaminació atmosfèrica
Catalysis
Diesel motors
Atmospheric pollution
Issue Date: 18-Apr-2019
Publisher: MDPI
Abstract: The effect of partial Ti substitution by Mn, Fe, Co, or Cu on the NOx storage capacity (NSC) of a BaTi0.8B0.2O3 lean NOx trap (LNT) catalyst has been analyzed. The BaTi0.8B0.2O3 catalysts were prepared using the Pechini's sol-gel method for aqueous media. The characterization of the catalysts (BET, ICP-OES, XRD and XPS) reveals that: i) the partial substitution of Ti by Mn, Co, or Fe changes the perovskite structure from tetragonal to cubic, whilst Cu distorts the raw tetragonal structure and promotes the segregation of Ba2TiO4 (which is an active phase for NOx storage) as a minority phase and ii) the amount of oxygen vacancies increases after partial Ti substitution, with the BaTi0.8Cu0.2O3 catalyst featuring the largest amount. The BaTi0.8Cu0.2O3 catalyst shows the highest NSC at 400 °C, based on NOx storage cyclic tests, which is within the range of highly active noble metal-based catalysts.
Note: Reproducció del document publicat a: https://doi.org/10.3390/catal9040365
It is part of: Catalysts, 2019, vol. 9, num. 4, p. 365
URI: http://hdl.handle.net/2445/135664
Related resource: https://doi.org/10.3390/catal9040365
ISSN: 2073-4344
Appears in Collections:Articles publicats en revistes (Ciència dels Materials i Química Física)

Files in This Item:
File Description SizeFormat 
690472.pdf2.48 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons