Please use this identifier to cite or link to this item: http://hdl.handle.net/2445/136717
Title: Alkali-activated cements for TES materials in buildings' envelops formulated with glass cullet recycling waste and microencapsulated phase change materials
Author: Giró Paloma, Jessica
Barreneche, Camila
Maldonado Alameda, Alex
Royo, Miguel
Formosa Mitjans, Joan
Fernández Renna, Ana Inés
Chimenos Ribera, Josep Ma.
Keywords: Emmagatzematge d'energia tèrmica
Edificis
Heat storage
Buildings
Issue Date: 3-Jul-2019
Publisher: MDPI
Abstract: Within the thermal energy storage field, one of the main challenges of this study is the development of new enhanced heat storage materials to be used in the building sector. The purpose of this study is the development of alkali-activated cements (AACs) with mechanical properties to store high amounts of heat. These AACs incorporate wastes from industrial glass process as well as microencapsulated phase change materials (mPCMs) to improve the thermal inertia of building walls, and accordingly respective energy savings. The research presented below consists of the exhaustive characterization of different AACs formulated from some waste generated during the proper management of municipal waste used as precursor. In this case study, AACs were formulated with the waste generated during the recycling of glass cullet, namely ceramic, stone, and porcelain (CSP), which is embedding a mPCM. The addition of mPCM was used as thermal energy storage (TES) material. The mechanical properties were also evaluated in order to test the feasibility of the use of the new formulated materials as a passive TES system. The results showed that the AAC obtained from CSP (precursors) mixed with mPCMs to obtain a thermal regulator material to be implemented in building walls was reached successfully. The material developed was resistant enough to perform as insulating panels. The formulated materials had high storage capacity depending on the PCM content. The durability of the mPCM shell was studied in contact with alkaline medium (NaOH 4 M) and no degradation was confirmed. Moreover, the higher the content of mPCM, the lower the mechanical properties expected, due to the porosity increments with mPCM incorporation in the formulations.
Note: Reproducció del document publicat a: https://doi.org/10.3390/ma12132144
It is part of: Materials, 2019, vol. 12, num. 13, p. 2144
URI: http://hdl.handle.net/2445/136717
Related resource: https://doi.org/10.3390/ma12132144
ISSN: 1996-1944
Appears in Collections:Articles publicats en revistes (Ciència dels Materials i Química Física)

Files in This Item:
File Description SizeFormat 
690651.pdf2.21 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons