Please use this identifier to cite or link to this item: http://hdl.handle.net/2445/140919
Title: Characterisation and partition of valuable metals from WEEE in weathered municipal solid waste incineration bottom ash, with a view to recovering
Author: Pérez Martínez, Susanna
Giró Paloma, Jessica
Maldonado Alameda, Alex
Formosa Mitjans, Joan
Queralt i Mitjans, Ignasi
Chimenos Ribera, Josep Ma.
Keywords: Incineració
Recuperació de residus
Metalls
Incineration
Recovery of waste products
Metals
Issue Date: 31-Jan-2019
Publisher: Elsevier B.V.
Abstract: As the demand for critical and valuable metals increases due to industrial developments, especially in electronics and high-technology industries, the search for novel and sustainable sources grows in significance. Incinerated municipal solid waste (MSW) is a potential source of valuable metals, since a lot of waste from electrical and electronic equipment (WEEE) is not recycled properly and are is managed together with the refuse fraction of MSW, which is often landfilled or incinerated. Bottom Ash (BA) is the main by-product of incinerated MSW, which has been characterized to assess the potential recovery of valuable metals. The determination of the total amount of valuable metals (Ag, Al, Au, Be, Co, Cu, Ga, Ge, In, Ir, Li, Ni, Pd, Pt, Sb, Ta, and W) in seasonal samples of weather bottom ash (WBA) was performed by a total acid digestion followed by a chemical analysis. Besides, a sequential extraction procedure (SEP) is conducted to define their partition. The characterisation has shown that the content of valuable metals in the incineration WBA, which was highest in the 0-2mm fraction was much lower than in concentrated ores commonly used as primary sources. Moreover, the SEP showed little potential for the valorisation of most of the metals, as they are embedded in or bound to a silicic matrix or sintered metal oxides, and so their extraction requires strong-acid digestion or a highly oxidizing environment. This work contributes to the use of residual sources as secondary resources and to the correct management of the end-of-life electrical and electronic equipment.
Note: Versió postprint del document publicat a: https://doi.org/10.1016/j.jclepro.2019.01.313
It is part of: Journal Of Cleaner Production, 2019, vol. 218, p. 61-68
URI: http://hdl.handle.net/2445/140919
Related resource: https://doi.org/10.1016/j.jclepro.2019.01.313
ISSN: 0959-6526
Appears in Collections:Articles publicats en revistes (Ciència dels Materials i Química Física)

Files in This Item:
File Description SizeFormat 
685271.pdf1.13 MBAdobe PDFView/Open    Request a copy


Embargat   Document embargat fins el 31-1-2021


This item is licensed under a Creative Commons License Creative Commons