Please use this identifier to cite or link to this item: http://hdl.handle.net/2445/158040
Title: Powder properties and processing conditions affecting cold spray deposition
Author: Silvello, A. (Alessio)
Cavaliere, P.
Albaladejo-Fuentes, Vicente
Martos, Ana
Dosta Parras, Sergi
García Cano, Irene
Keywords: Revestiments
Resistència de materials
Anàlisi de dades de panel
Coatings
Strength of materials
Panel analysis
Issue Date: 21-Jan-2020
Publisher: MDPI
Abstract: The cold spray coating properties and performances are largely affected by feedstock characteristics and the employed processing parameters. Starting from experimental results obtained from the bibliographic data, the relationships between starting particles, processing conditions, and coating properties obtained by cold gas spray were analyzed. The relationships among these properties and particle velocity were described for various material systems. The effect on particle flattening, hardness, and porosity were largely described. Finally, the influence of the different parameters on the process output and on the coating properties was analytically defined through the employment of the multi-objective simulation tool modeFRONTIER. The analysis of data from the bibliography is a new trend that can also be applied to cold spray in order to analyze the effect of powder The cold spray coating properties and performances are largely affected by feedstock characteristics and the employed processing parameters. Starting from experimental results obtained from the bibliographic data, the relationships between starting particles, processing conditions, and coating properties obtained by cold gas spray were analyzed. The relationships among these properties and particle velocity were described for various material systems. The effect on particle flattening, hardness, and porosity were largely described. Finally, the influence of the different parameters on the process output and on the coating properties was analytically defined through the employment of the multi-objective simulation tool modeFRONTIER. The analysis of data from the bibliography is a new trend that can also be applied to cold spray in order to analyze the effect of powder properties and spraying parameters on the cold spray (CS) process. and spraying parameters on the cold spray (CS) process.
Note: Reproducció del document publicat a: https://doi.org/10.3390/coatings10020091
It is part of: Coatings, 2020, vol. 10, num. 91, p. 1-19
URI: http://hdl.handle.net/2445/158040
Related resource: https://doi.org/10.3390/coatings10020091
ISSN: 2079-6412
Appears in Collections:Articles publicats en revistes (Ciència dels Materials i Química Física)

Files in This Item:
File Description SizeFormat 
695286.pdf4.57 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons