Please use this identifier to cite or link to this item: http://hdl.handle.net/2445/46684
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKint, Darwin, P. R.-
dc.contributor.authorRudé i Payró, Elisabet-
dc.contributor.authorLlorens Llacuna, Joan-
dc.contributor.authorMuñoz-Guerra, Sebastián-
dc.date.accessioned2013-10-04T10:00:57Z-
dc.date.available2013-10-04T10:00:57Z-
dc.date.issued2002-
dc.identifier.issn0032-3861-
dc.identifier.urihttp://hdl.handle.net/2445/46684-
dc.description.abstractThe influence of incorporating 5-tert-butyl isophthalic units (tBI) in the polymer chain of poly(ethylene terephthalate) (PET) on the crystallization behavior, crystal structure, and tensile and gas transport properties of this polyester was evaluated. Random poly(ethyleneterephthalate-co-5-tert-butyl isophthalate) copolyesters (PETtBI) containing between 5 and 40 mol% of tBI units were examined. Isothermal crystallization studies were performed on amorphous glassy films at 120 8C and on molten samples at 200 8C by means of differential scanning calorimetry. Furthermore, the non-isothermal crystallization behavior of the copolyesters was investigated. It was observed that both crystallinity and crystallization rate of the PETtBI copolyesters tend to decrease largely with the comonomeric content, except for the copolymer containing 5 mol% of tBI units, which crystallized faster than PET. Fiber X-ray diffraction patterns of the semicrystalline PETtBI copolyesters proved that they adopt the same triclinic crystal structure as PET with the comonomeric units being excluded from the crystalline phase. Although PETtBI copolyesters became brittle for higher contents in tBI, the tensile modulus and strength of PET were barely affected by copolymerization. The ncorporation of tBI units slightly increased the permeability of PET, but copolymers containing up to 20 mol% of the comonomeric units were still able to present barrier properties.-
dc.format.extent18 p.-
dc.format.mimetypeapplication/pdf-
dc.language.isoeng-
dc.publisherElsevier B.V.-
dc.relation.isformatofVersió postprint del document publicat a: http://dx.doi.org/10.1016/S0032-3861(02)00715-2-
dc.relation.ispartofPolymer, 2002, vol. 43, num. 26, p. 7529-7537-
dc.relation.urihttp://dx.doi.org/10.1016/S0032-3861(02)00715-2-
dc.rights(c) Elsevier B.V., 2002-
dc.subject.classificationCristal·lització-
dc.subject.classificationEstructura cristal·lina (Sòlids)-
dc.subject.classificationPropietats mecàniques-
dc.subject.classificationPermeabilitat-
dc.subject.classificationTereftalat de polietilè-
dc.subject.otherCrystallization-
dc.subject.otherLayer structure (Solids)-
dc.subject.otherMechanical properties-
dc.subject.otherPermeability-
dc.subject.otherPolyethylene terephthalate-
dc.titleCrystallization and properties of poly(ethylene terephtalate) copolymers containing 5-tert-butyl isophtalic unitseng
dc.typeinfo:eu-repo/semantics/article-
dc.typeinfo:eu-repo/semantics/acceptedVersion-
dc.identifier.idgrec507395-
dc.date.updated2013-10-04T10:00:57Z-
dc.rights.accessRightsinfo:eu-repo/semantics/openAccess-
Appears in Collections:Articles publicats en revistes (Enginyeria Química i Química Analítica)

Files in This Item:
File Description SizeFormat 
507395.pdf455.84 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.