Please use this identifier to cite or link to this item:
|Title:||Effect of water contamination on the shear bond strength of five orthodontic adhesives|
Bravo, Luis A.
Romeo Garcia, Alejandro
Higuera, Blanca de la
Contaminació de l'aigua
|Publisher:||Medicina Oral SL|
|Abstract:||Objectives: To evaluate the shear bond strength and site of failure of brackets bonded to dry and wet enamel. Study design: 50 teeth were divided into ten groups of 5 teeth each (10 surfaces). In half the groups enamel was kept dry before bonding, and in the other half distilled water was applied to wet the surface after etching. The following groups were established: 1)Acid/Transbond-XT (dry/wet) XT; 2) Transbond Plus Self Etching Primer (TSEP)/Transbond-XT paste (dry/wet); 3) Concise (dry), Transbond MIP/Concise (wet), 4) FujiOrtho-LC (dry/wet); 5) SmartBond (dry/wet). Brackets were bonded to both buccal and lingual surfaces. Specimens were stored in distilled water (24 hours at 37ºC) and thermocycled. Brackets were debonded using a Universal testing machine (cross-head speed 1 mm/min). Failure sites were classified using a stereomicroscope. Results: No significant differences in bond strength were detected between the adhesives under wet and dry conditions except for Smart- Bond, whose bond strength was significantly lower under dry conditions. For all the adhesives most bond failures were of mixed site location except for Smartbond, which failed at the adhesive-bracket interface. Conclusions: Under wet conditions the bonding capacity of the adhesives tested was similar than under dry conditions, with the exception of SmartBond which improved under wet conditions|
|Note:||Reproducció del document publicat a: http://dx.doi.org/10.4317/medoral.15.e820|
|It is part of:||Medicina Oral, Patología Oral y Cirugia Bucal, 2010, vol. 15, num. 5, p. 820-826|
|Appears in Collections:||Articles publicats en revistes (Odontostomatologia)|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.