Please use this identifier to cite or link to this item:
|Title:||Influence of Cold Gas Spray process conditions on the microstructure of Fe-based amorphous coatings|
Cano, I. G.
Cinca i Luis, Núria
Dosta Parras, Sergi
Guilemany, J. M. (José María)
|Abstract:||Fe-based amorphous metallic coatings were prepared by Cold Gas Spray process. Through this study, the effects of the process conditions such as spraying distance, gas pressure and temperature on the microstructure of as-sprayed coatings are evaluated. Microstructural studies show that the coatings can present a densely layered structure with porosity below 0.5% and thickness around 800 μm depending on the process conditions. Precipitation of nanocrystals in as-sprayed coatings is observed and present results show its dependence on the thermal and kinetic energy implicated in the process. In general, when gas temperature and pressure decreased, in the studied range, coatings displayed a dense and amorphous structure.|
|Note:||Versió postprint del document publicat a: http://dx.doi.org/10.1016/j.jallcom.29|
|It is part of:||Journal of Alloys and Compounds, 2014, vol. 622, p. 995-999|
|Appears in Collections:||Articles publicats en revistes (Ciència dels Materials i Química Física)|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.