Please use this identifier to cite or link to this item:
http://hdl.handle.net/2445/113042
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Botaya Turón, Luis | - |
dc.contributor.author | Coromina, Xavier | - |
dc.contributor.author | Samitier i Martí, Josep | - |
dc.contributor.author | Puig i Vidal, Manuel | - |
dc.contributor.author | Otero Díaz, Jorge | - |
dc.date.accessioned | 2017-06-28T15:22:51Z | - |
dc.date.available | 2017-06-28T15:22:51Z | - |
dc.date.issued | 2016-05-25 | - |
dc.identifier.issn | 1424-8220 | - |
dc.identifier.uri | http://hdl.handle.net/2445/113042 | - |
dc.description.abstract | Here we devise a multiprobe electrical measurement system based on quartz tuning forks (QTFs) and metallic tips capable of having full 3D control over the position of the probes. The system is based on the use of bent tungsten tips that are placed in mechanical contact (glue-free solution) with a QTF sensor. Shear forces acting in the probe are measured to control the tip-sample distance in the Z direction. Moreover, the tilting of the tip allows the visualization of the experiment under the optical microscope, allowing the coordination of the probes in X and Y directions. Meanwhile, the metallic tips are connected to a current-voltage amplifier circuit to measure the currents and thus the impedance of the studied samples. We discuss here the different aspects that must be addressedwhenconductingthesemultiprobeexperiments,suchastheamplitudeofoscillation,shear force distance control, and wire tilting. Different results obtained in the measurement of calibration samples and microparticles are presented. They demonstrate the feasibility of the system to measure the impedance of the samples with a full 3D control on the position of the nanotips. | - |
dc.format.extent | 9 p. | - |
dc.format.mimetype | application/pdf | - |
dc.language.iso | eng | - |
dc.publisher | MDPI | - |
dc.relation.isformatof | Reproducció del document publicat a: https://doi.org/10.3390/s16060757 | - |
dc.relation.ispartof | Sensors, 2016, vol. 16, num. 6, p. 757 | - |
dc.relation.uri | https://doi.org/10.3390/s16060757 | - |
dc.rights | cc-by (c) Botaya Turón, Luis et al., 2016 | - |
dc.rights.uri | http://creativecommons.org/licenses/by/3.0/es | - |
dc.source | Articles publicats en revistes (Enginyeria Electrònica i Biomèdica) | - |
dc.subject.classification | Microscòpia d'efecte túnel | - |
dc.subject.classification | Impedància (Electricitat) | - |
dc.subject.classification | Quars | - |
dc.subject.other | Scanning tunneling microscopy | - |
dc.subject.other | Impedance (Electricity) | - |
dc.subject.other | Quartz | - |
dc.title | Visualized multiprobe electrical impedance measurements with STM tips using shear force feedback control | - |
dc.type | info:eu-repo/semantics/article | - |
dc.type | info:eu-repo/semantics/publishedVersion | - |
dc.identifier.idgrec | 668052 | - |
dc.date.updated | 2017-06-28T15:22:51Z | - |
dc.rights.accessRights | info:eu-repo/semantics/openAccess | - |
dc.identifier.pmid | 27231911 | - |
Appears in Collections: | Articles publicats en revistes (Enginyeria Electrònica i Biomèdica) Articles publicats en revistes (Institut de Bioenginyeria de Catalunya (IBEC)) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
668052.pdf | 2.23 MB | Adobe PDF | View/Open |
This item is licensed under a
Creative Commons License