Please use this identifier to cite or link to this item: http://hdl.handle.net/2445/25044
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAlay, Josep Lluíscat
dc.contributor.authorVandervorst, Wilfriedcat
dc.date.accessioned2012-05-08T07:14:35Z-
dc.date.available2012-05-08T07:14:35Z-
dc.date.issued1994-07-
dc.identifier.issn0734-2101-
dc.identifier.urihttp://hdl.handle.net/2445/25044-
dc.description.abstractThe changes undergone by the Si surface after oxygen bombardment have special interest for acquiring a good understanding of the Si+-ion emission during secondary ion mass spectrometry (SIMS) analysis. For this reason a detailed investigation on the stoichiometry of the builtup surface oxides has been carried out using in situ x-ray photoemission spectroscopy (XPS). The XPS analysis of the Si 2p core level indicates a strong presence of suboxide chemical states when bombarding at angles of incidence larger than 30°. In this work a special emphasis on the analysis and interpretation of the valence band region was made. Since the surface stoichiometry or degree of oxidation varies with the angle of incidence, the respective valence band structures also differ. A comparison with experimentally measured and theoretically derived Si valence band and SiO2 valence band suggests that the new valence bands are formed by a combination of these two. This arises from the fact that Si¿Si bonds are present on the Si¿suboxide molecules, and therefore the corresponding 3p-3p Si-like subband, which extends towards the Si Fermi level, forms the top of the respective new valence bands. Small variations in intensity and energy position for this subband have drastic implications on the intensity of the Si+-ion emission during sputtering in SIMS measurements. A model combining chemically enhanced emission and resonant tunneling effects is suggested for the variations observed in ion emission during O+2 bombardment for Si targets.eng
dc.format.extent5 p.-
dc.format.mimetypeapplication/pdf-
dc.language.isoengeng
dc.publisherAmerican Institute of Physics-
dc.relation.isformatofReproducció del document publicat a: http://dx.doi.org/10.1116/1.579187-
dc.relation.ispartofJournal of Vacuum Science Technology A-Vacuum Surfaces and Films, 1994, vol. 12, p. 2420-2424-
dc.relation.urihttp://dx.doi.org/10.1116/1.579187-
dc.rights(c) American Institute of Physics, 1994-
dc.sourceArticles publicats en revistes (Enginyeria Electrònica i Biomèdica)-
dc.subject.classificationSemiconductorscat
dc.subject.classificationPropietats òptiquescat
dc.subject.classificationOxidaciócat
dc.subject.classificationQuímica de superfíciescat
dc.subject.classificationImpactecat
dc.subject.otherSemiconductorseng
dc.subject.otherOptical propertieseng
dc.subject.otherOxidationeng
dc.subject.otherSurface chemistryeng
dc.subject.otherImpacteng
dc.titleModifications in the Si valence band after ion-beam-induced oxidationeng
dc.typeinfo:eu-repo/semantics/article-
dc.identifier.idgrec109544-
dc.rights.accessRightsinfo:eu-repo/semantics/openAccess-
Appears in Collections:Articles publicats en revistes (Enginyeria Electrònica i Biomèdica)

Files in This Item:
File Description SizeFormat 
109544.pdf463.49 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.