Please use this identifier to cite or link to this item:
Title: GdBaCo2O5+x layered perovskite as an intermediate temperature solid oxide fuel cell cathode
Author: Tarancón Rubio, Albert
Morata García, Alex
Dezanneau, Guilhem
Skinner, Stephen J.
Kilner, John A.
Estradé Albiol, Sònia
Hernández Ramírez, Francisco
Peiró Martínez, Francisca
Morante i Lleonart, Joan Ramon
Keywords: Serigrafia
Piles de combustible
Fuel cells
Issue Date: 2007
Publisher: Elsevier B.V.
Abstract: GdBaCo2O5+x (GBCO) was evaluated as a cathode for intermediate-temperature solid oxide fuel cells. A porous layer of GBCO was deposited on an anode-supported fuel cell consisting of a 15m thick electrolyte of yttria-stabilized zirconia (YSZ) prepared by dense screen-printing and a Ni–YSZ cermet as an anode (Ni–YSZ/YSZ/GBCO). Values of power density of 150 mW cm−2 at 700◦C and ca. 250 mW cm−2 at 800◦C are reported for this standard configuration using 5% of H2 in nitrogen as fuel. An intermediate porous layer of YSZ was introduced between the electrolyte and the cathode improving the performance of the cell. Values for power density of 300 mW cm−2 at 700◦C and ca. 500 mW cm−2 at 800◦C in this configuration were achieved.
Note: Versió postprint del document publicat a:
It is part of: Journal of Power Sources, 2007, vol. 174, num. 1, p. 257 -263
Related resource:
ISSN: 0378-7753
Appears in Collections:Articles publicats en revistes (Enginyeria Electrònica i Biomèdica)

Files in This Item:
File Description SizeFormat 
553769.pdf1.83 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.