# metadata.dc.description.abstract[].value
1. Procedure (Note 1) A. 3-Ammoniopropylsulfate (1). An oven-dried single-necked 100 mL round-bottomed flask (14/23 joint), equipped with a 2.5-cm Teflon-coated magnetic stirbar, is charged with 3-amino-1-propanol (11.5 mL, 150 mmol, 1 equiv) (Note 2) and anhydrous dichloromethane (35 mL) (Note 3). A 50 mL pressure-equalizing addition funnel (14/23 joint) equipped with a CaCl2 tube is attached to the round-bottomed flask and is then charged with chlorosulfonic acid (10.5 mL, 159 mmol, 1.06 equiv) (Note 4) using a 20 mL glass luer-lock syringe. The flask is immersed in an ice/water bath and the solution is stirred for 5 min. The chlorosulfonic acid is added dropwise over 30 min, allowing the fumes to escape. A white precipitate is formed during the addition. Once the addition is complete, the reaction is stirred at 0 °C for 20 min and left to warm slowly to room temperature over 30 min (Note 5). Once at room temperature, the reaction mixture is stirred for 1 h. The resulting mixture is filtered through a 70 mm diameter Number 3 Glass filter funnel with a Büchner setup. A bent spatula and methanol (25 mL) (Note 6) are used to remove remaining product from the flask walls. The mixture in the filter funnel is triturated with methanol (40 mL, then 2 × 20 mL) (Note 6), using a spatula to break up the lumps each time. The resulting white solid is broken up into a coarse powder and transferred to a 100 mL round-bottomed flask (29/32 joint), where it is placed on a rotary evaporator (40 °C, 12 mmHg pressure) for 1 h. The resulting white solid is ground to a fine white powder using a 10 cm diameterglass mortar and pestle, retransferred to a 100 mL round-bottomedflask and dried on a high vacuum line (25 °C, 0.1 mmHg pressure) for 2 h giving the title compound 1 (20.72 g, 134 mmol, 89% yield) (Note 7) as a fine white powder.

# metadata.dc.source[].value
Articles publicats en revistes (Química Inorgànica i Orgànica)