# name
Synergies, radiation and kinetics in photo-Fenton process with UVA-LEDs

# metadata.dc.description.abstract[].value
The photo-Fenton process, with UV-A LED (λ=380-390, 390-400 and 380-400 nm) has demonstrated to be effective in the abatement of a target micropollutant, such as diphenhydramine hydrochloride (DPH). Different concentrations of iron (Fe2+) and H2O2 were tested and monitored, and the best results in DPH removal were obtained for the highest concentrations of both iron (II) and H2O2 (10 mg Fe2+/L - 150 mg H2O2/L). The evolution of iron and peroxide concentration was also monitored. Kinetic studies showed that dark Fenton process prevails at the beginning of the experiment, when Fe2+ concentration is higher. However, after these initial moments, the prevailing process is photo-Fenton and, in addition, wavelength radiation plays an important role. Concerning the effect of radiation, four LEDs (4.2 W total power) were used, emitting radiation in the wavelength range between 380-390 or 390-400 nm. Similar results were obtained in both cases in DPH removal by photo-Fenton (30 min for total elimination). However, a synergistic effect was observed when two LEDs of 380-390 nm and two LEDs of 390-400 nm were used. Total power was the same (4.2 W) in each experimental condition, but the increase in the wavelength range to 20 nm (380-400 nm) produces an increase in the rate of DPH removal, achieving its total elimination at 15 min. This fact, with the use of a simple radiation model, reveals the important role that radiation plays in the photo-Fenton process. Finally, the formed intermediates were determined and some reaction pathways were proposed.

# metadata.dc.relation.ispartof[].value
Journal of Hazardous Materials, 2019, vol. 380

# metadata.dc.source[].value
Articles publicats en revistes  (Enginyeria Química i Química Analítica)

# metadata.dc.title[].value
Synergies, radiation and kinetics in photo-Fenton process with UVA-LEDs