Da Silva, F. S.Cinca i Luis, NúriaDosta Parras, SergiGarcía Cano, IreneGuilemany, J. M. (José María)Benedetti, Assis Vicente2020-05-212020-07-042019-07-041478-422Xhttps://hdl.handle.net/2445/161919This work describes the influence of standoff distance (SoD), and gas temperature on the morphology and corrosion resistance of Al-10%Al2O3 coatings deposited by cold gas spray (CGS) on carbon steel. The results showed that the standoff distance had little effect on the thickness and microstructure of the coating. However, a 100 °C decrease of the spraying temperature reduced the coating thickness by 300 μm. The use of electrochemical analyses and SEM images showed that all the coatings studied were able to protect the substrate during at least 1300 h of immersion, due to the dense microstructure obtained by CGS.29 p.application/pdfeng(c) Maney Publishing, 2019Corrosió i anticorrosiusRevestiments protectorsAluminiCorrosion and anti-corrosivesProtective coatingsAluminuminfo:eu-repo/semantics/article6917952020-05-21info:eu-repo/semantics/openAccess