Please use this identifier to cite or link to this item: http://hdl.handle.net/2445/117634
Title: Influence of porosity on the critical currents of trifluoroacetate-MOD YBa2Cu3O7 films
Author: Castaño Linares, Óscar
Cavallaro, Andrea
Palau Masoliver, Anna
González, J. C.
Rossell, Marta Dàcil
Puig, Teresa
Piñol, S.
Mestres Andreu, Narcís
Sandiumenge Ortiz, Felip
Pomar Barbeito, Alberto
Obradors, Xavier
Keywords: Pel·lícules fines
Porositat
Superconductivitat
Revestiments
Thin films
Porosity
Superconductivity
Coatings
Issue Date: 2-Jun-2003
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Abstract: The influence of porosity on the superconducting properties have been investigated on YBa/sub 2/Cu/sub 3/O/sub 7/ thin films deposited on LaAlO/sub 3/ [100] substrates by the so-called Trifluoroacetate (TFA) route. Micro-Raman spectroscopy have been used to determine the concentration of c-axis grains /spl delta/ in different samples and their influence on the final film porosity as observed from SEM imaging. This has been compared with measurements of resistivity and critical currents in the same samples. We prove that this /spl delta/ fraction is the main parameter controlling the porosity and hence the normal-state resistivity of the thin films. The optimization of the microstructure of these YBa/sub 2/Cu/sub 3/O/sub 7/ TFA films allow to have high critical currents : J/sub c/ = 3 /spl times/ 10/sup 6/ A/cm/sup 2/ at 77 K.
Note: Reproducció del document publicat a: https://doi.org/10.1109/TASC.2003.811832
It is part of: IEEE Transactions on Applied Superconductivity, 2003, vol. 13, num. 2, p. 2504-2507
URI: http://hdl.handle.net/2445/117634
Related resource: https://doi.org/10.1109/TASC.2003.811832
ISSN: 1051-8223
Appears in Collections:Articles publicats en revistes (Enginyeria Electrònica i Biomèdica)

Files in This Item:
File Description SizeFormat 
674088.pdf389.09 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.