Please use this identifier to cite or link to this item:
http://hdl.handle.net/2445/135406Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Romeu, Jordi | - |
| dc.contributor.author | Blanch, Sebastian | - |
| dc.contributor.author | Vidal Martínez, Neus | - |
| dc.contributor.author | López Villegas, José María | - |
| dc.contributor.author | Aguasca, Albert | - |
| dc.date.accessioned | 2019-06-19T09:51:40Z | - |
| dc.date.available | 2019-06-19T09:51:40Z | - |
| dc.date.issued | 2018-07-20 | - |
| dc.identifier.issn | 1536-1225 | - |
| dc.identifier.uri | http://hdl.handle.net/2445/135406 | - |
| dc.description.abstract | Three different 3D printing technologies: Stereolithography (SLA), Fused Deposition Modeling (FDM) and HP Multi Jet Fusion Technology (MJF) are compared to build a parabolic reflector operating at 100 GHz. Fabrication tolerance and surface roughness before and after metallization are accurately measured. The performance of the reflectors is measured in the near field and its performance is compared against an optical grade reflector. In this way the performance of the final product is thoroughly assessed | - |
| dc.format.extent | 4 p. | - |
| dc.format.mimetype | application/pdf | - |
| dc.language.iso | eng | - |
| dc.publisher | Institute of Electrical and Electronics Engineers (IEEE) | - |
| dc.relation.isformatof | Versió postprint del document publicat a: https://doi.org/10.1109/LAWP.2018.2857856 | - |
| dc.relation.ispartof | IEEE Antennas and Wireless Propagation Letters, 2018, vol. 17, num. 11, p. 2061-2064 | - |
| dc.relation.uri | https://doi.org/10.1109/LAWP.2018.2857856 | - |
| dc.rights | (c) Institute of Electrical and Electronics Engineers (IEEE), 2018 | - |
| dc.source | Articles publicats en revistes (Enginyeria Electrònica i Biomèdica) | - |
| dc.subject.classification | Impressió 3D | - |
| dc.subject.classification | Antenes (Electrònica) | - |
| dc.subject.classification | Ones electromagnètiques | - |
| dc.subject.other | Three-dimensional printing | - |
| dc.subject.other | Antennas (Electronics) | - |
| dc.subject.other | Electromagnetic waves | - |
| dc.title | Assessment of 3D Printing Technologies for Millimeter Wave Reflectors | - |
| dc.type | info:eu-repo/semantics/article | - |
| dc.type | info:eu-repo/semantics/acceptedVersion | - |
| dc.identifier.idgrec | 682422 | - |
| dc.date.updated | 2019-06-19T09:51:40Z | - |
| dc.rights.accessRights | info:eu-repo/semantics/openAccess | - |
| Appears in Collections: | Articles publicats en revistes (Enginyeria Electrònica i Biomèdica) | |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| 682422.pdf | 833.63 kB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.