Please use this identifier to cite or link to this item: http://hdl.handle.net/2445/164878
Title: Porous titanium-hydroxyapatite composite coating obtained on titanium by cold gas spray with high bond strength for biomedical applications
Author: Guillem-Marti, Jordi
Cinca i Luis, Núria
Punset, Miguel
García Cano, Irene
Gil, Francisco Javier
Guilemany, J. M. (José María)
Dosta Parras, Sergi
Keywords: Titani
Revestiments
Materials biomèdics
Titanium
Coatings
Biomedical materials
Issue Date: 1-Aug-2019
Publisher: Elsevier B.V.
Abstract: The lack of bioactivity of titanium (Ti) is one of the main drawbacks for its application in biomedical implants since it can considerable reduce its osseointegration capacities. One strategy to overcome this limitation is the coating of Ti with hydroxyapatite (HA), which presents similar chemical composition than bone. Nonetheless, most of the strategies currently used generate a non-stable coating and may produce the formation of amorphous phases when high temperatures are used. Herein, we proposed to generate a Ti-HA composite coating on Ti surface to improve the stability of the bioactive coating. The coating was produced by cold gas spraying, which uses relatively low temperatures, and compared to a Ti coating. The coating was thoroughly characterized in terms of morphology, roughness, porosity and phase composition. In addition, the coating was mechanically characterized using a tensile loading machine. Finally, biological response was evaluated after seeding SaOS-2 osteoblasts and measuring cell adhesion, proliferation and differentiation. The novel Ti-HA coating presented high porosity and high adhesion and bond strengths. No change in HA phases was observed after coating formation. Moreover, osteoblast-like cells adhered, proliferated and differentiated on Ti-HA coated surfaces suggesting that the novel coating might be a good candidate for biomedical applications.
Note: Versió postprint del document publicat a: https://doi.org/10.1016/j.colsurfb.2019.04.048
It is part of: Colloids and Surfaces B-Biointerfaces, 2019, vol. 180, p. 245-253
URI: http://hdl.handle.net/2445/164878
Related resource: https://doi.org/10.1016/j.colsurfb.2019.04.048
ISSN: 0927-7765
Appears in Collections:Articles publicats en revistes (Ciència dels Materials i Química Física)

Files in This Item:
File Description SizeFormat 
693730.pdf504.48 kBAdobe PDFView/Open    Request a copy


Embargat   Document embargat fins el 1-8-2021


This item is licensed under a Creative Commons License Creative Commons