Embargament

Document embargat fins el 2026-11-24

Tipus de document

Tesi

Versió

Versió publicada

Data de publicació

Tots els drets reservats

Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/230009

Production of phytomycetogenic sausages. Mimicking the Catalan fuet

Títol de la revista

Contribució addicional

ISSN de la revista

Títol del volum

Resum

[eng] The main objective of this study is to develop a myco-vegetal fuet product prototype as a sustainable alternative to traditional meat products, and to evaluate its nutritional and organoleptic characteristics. The initial phase of the project focused on the selection and characterization of various strains of Rhizopus sp. During this phase, the strains were described, and molecular analyses were performed using ITS and TEF1α markers. Six strains were isolated, belonging to three Rhizopus species: R. arrhizus, R. microsporus, and R. stolonifer. Among them, the T1 strain of R. arrhizus was selected as the most suitable candidate for industrial application. Using R. arrhizus T1 as the fermenting starter culture, different myco-vegetal product prototypes were developed. The process began with the use of soybeans as the main substrate, but this presented challenges in achieving the desired organoleptic properties through curing by dehydration. In an effort to improve fermentation, we tested a double fermentation process involving two fungi and one bacterium applied to two different substrates: strain T1 R. arrhizus + Yarrowia lipolytica, and strain T1 R. arrhizus + Leuconostoc carnosum. However, the results did not improve the organoleptic properties compared to the simple fermentation with R. arrhizus T1. Another line of investigation focused on testing new plant-based substrates, using Texturized Vegetable Protein (TVP). In this case, the water absorption capacity of the TVP was a critical factor in product development. While higher water absorption promotes better mycelial growth and facilitates fermentation, excess moisture hinders proper fungal growth. Moreover, we observed that the protein concentration in the TVP is key to supporting mycelial development. TVP with protein concentrations between 60% and 80% supported better fungal growth, as these levels more closely resemble the macronutrient concentration of natural substrates, such as soybean or other legumes grains. We also identified the importance of adding vegetable fats to the substrate to achieve a meat-like texture. We tested the addition of various fat sources: (i) coconut fat (solid), (ii) rapeseed oil–protein emulsion (treated with transglutaminase enzyme for gelation), and (iii) citrus fibre (a common fat replacement). The most favourable result was achieved using the rapeseed oil–protein emulsion. In the final stages, we succeeded in developing a prototype that closely mimicked the texture and colour of traditional fuet. Notably, this prototype required no food additives, as the fungal mycelium naturally bound the matrix together. This prototype demonstrated a complete and balanced nutritional profile, laying the groundwork for future product innovation. In collaboration with the i3L Institute of Life Sciences (Jakarta, Indonesia), we developed a final prototype product that revealed high protein content and low-fat levels, highlighting its potential as a plant-based alternative to conventional meat products. In this case, the comparison was made against lap-cheong (a type of cured sausage commonly consumed in Asian countries). Although the latest prototypes meet the goals of being sustainable alternatives to traditional meat products, further improvement of their organoleptic profile is still needed.
cat] Aquest estudi té com a objectiu principal desenvolupar un prototip de fuet d’origen mico-vegetal com alternativa sostenible als productes càrnics tradicionals, i fer una avaluació de les seves característiques nutricionals i organolèptiques. La fase inicial del projecte es va centrar en la selecció i caracterització de diverses soques de Rhizopus sp. En aquesta fase, es van descriure les soques i es van fer les anàlisis moleculars amb els marcadors ITS i TEF1α. Es van aïllar sis soques, pertanyents a tres espècies de Rhizopus: R. arrhizus, R. microsporus i R. stolonifer. Entre elles, la soca T1 de R. arrhizus és la que vam escollir com la candidata més adequada per a l’aplicació industrial. Utilitzant R. arrhizus T1, com a inòcul fermentador, es van desenvolupar diferents prototips mico-vegetals. Es va començar per l'ús de gra de soja com a substrat principal, però aquest substrat va plantejar problemes alhora d’aconseguir les característiques organolèptiques adequades mitjançant el curat per dessecació. Cercant una millora de la fermentació vam provar a desenvolupar un procés de doble fermentació amb dos fongs i un bacteri, en dos substrats diferents: soca T1 R. arrhizus + Yarrowia lipolytica i soca T1 R. arrhizus + Leuconostoc carnosum. Els resultats obtinguts no van millorar les propietats organolèptiques de la fermentació simple amb la soca T1 R. arrhizus. L'altra via d’investigació es va centrar en provar nous substrats vegetals, fent servir proteïna vegetal texturitzada (TVP). En aquest cas, la capacitat d'absorció d'aigua de la TVP va ser el factor crític pel desenvolupament del producte. Tot i que una major absorció d'aigua promou un millor creixement del miceli i facilita el procés de fermentació, per contra un excés d'aigua provoca un deficient creixement del fong. A més, comprovem que la concentració de proteïnes de les TVP es determinant pel creixement del miceli. Les TVP amb concentracions de proteïnes entre el 60% i el 80% faciliten el creixement del miceli, ja que aquestes concentracions s’assemblen més als substrats naturals. També vam detectar la importància d’afegir greixos vegetals al nostre substrat per tal d’aconseguir una textura similar a la carn. Vam procedir llavors a l’addició de diferents tipus de greixos: (i) greix de coco (sòlid), (ii) emulsió d'oli de colza-proteïna (tractada amb l'enzim transglutaminasa per la seva gelificació) i (iii) fibra cítrica (alternativa comuna a l’addició dels greixos). El resultat més favorable es va obtenir utilitzant l’emulsió d'oli de colza-proteïna. Finalment, vam aconseguir desenvolupar un prototip imitant la textura i el color dels fuets de referència. Destacant el fet de que aquest prototip no requereix cap tipus d’additiu alimentari, ja que el miceli fúngic cohesiona naturalment la matriu. Aquest prototip, va demostrar un potencial nutricional complert i equilibrat, establint les bases per a la innovació futura del producte. En col·laboració amb l’i3L Institute of Life Science (Jakarta, Indonèsia) vam desenvolupar un últim prototip que va revelar un alt contingut proteic i nivells baixos de greix, destacant el seu potencial com alternativa vegetal als productes càrnics convencionals. En aquest cas la comparació es va fer amb el lap-cheong (tipus de embotit curat consumit als països asiàtics). Tot i que els darrers prototips compleixin amb els objectius d’ésser una alternativa sostenible als productes càrnics tradicionals, caldria millorar el seu perfil organolèptic.

Recurs relacionat

Citació

Citació

SALZA, Simone. Production of phytomycetogenic sausages. Mimicking the Catalan fuet. [consulted: 22 of November of 2026]. Available at: https://hdl.handle.net/2445/230009

Exportar metadades

JSON - METS

Compartir registre