Carregant...
Fitxers
Tipus de document
ArticleVersió
Versió acceptadaData de publicació
Tots els drets reservats
Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/150436
Slag compounds formed from the nodularization treatment until pouring the molds to produce spheroidal graphite cast iron parts
Títol de la revista
Director/Tutor
ISSN de la revista
Títol del volum
Recurs relacionat
Resum
The present work is included as part of research undertaken about the effect of raw materials and some processing variables on the origin and the composition of those slag compounds formed during the manufacturing of spheroidal graphite cast iron parts. The composition and phases present in a number of slag samples obtained from Mg-treated melts have been investigated and discussed. Both slag samples which are floating in the melts surface and those adhered to the refractory lining of the pouring device have been analyzed. Finally, two different morphologies of slag inclusions found on cast iron parts have been studied and then compared to the results obtained from the previous slag samples characterization. It has been observed that composition of slag varies along the different steps of the production process as a function of the oxidizing level of the gas which is in contact with the melts and also of the remaining time in the ladle. Regarding crystallinity of slag, it has been found that it strongly depends on its composition and formation rate. All the information obtained from the study of slag formed before pouring process has been then used for estimating the origin of the slag inclusions commonly found in manufactured cast parts.
Matèries
Matèries (anglès)
Citació
Citació
REGORDOSA ROMAGOSA, Anna, LLORCA I ISERN, Núria. Slag compounds formed from the nodularization treatment until pouring the molds to produce spheroidal graphite cast iron parts. _International Journal of Metalcasting_. 2016. Vol. 10, núm. 435-451. [consulta: 24 de gener de 2026]. ISSN: 1939-5981. [Disponible a: https://hdl.handle.net/2445/150436]