Carregant...
Fitxers
Tipus de document
ArticleVersió
Versió publicadaData de publicació
Llicència de publicació
Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/176692
Preliminary study of new sustainable, alkali-activated cements using the residual fraction of the glass cullet recycling as precursor
Títol de la revista
Director/Tutor
ISSN de la revista
Títol del volum
Recurs relacionat
Resum
During the glass selection process by optical sorting equipment, a rejection material calledCSP (ceramic, stone, and porcelain) is generated, which is lower than 2 wt % of the glass culletcollected in Catalonia (Spain). Although this process should only separate non-glass impurities fromthe glass cullet, around 84 wt % of glass is found in the CSP. The CSP characterization reveals thatCSP is mainly compound by SiO2, Al2O3, alkali metals, and CaO, which are key components for thealkali-activated cement (AAC) development. Consequently, this study is focused on the potential ofCSP as a precursor to synthesize AAC. The concentration of the alkali activator (NaOH: 1 M, 4 M,and 8 M) and the liquid-to-solid (L/S) ratio were tested in the formulation of the AAC. The AACspecimens at 28 days cured were evaluated using X-ray diffraction (XRD), Fourier transform infraredspectroscopy (FIR), scanning electron microscopy (SEM), apparent density (ρapp), and compressivestrength (σs). The results obtained showed that the L/S of 0.5 and 4.0 M for NaOH concentration arethe best conditions, due to the mechanical properties (ρapp= 1.75 g·cm−3;σs= 52.8 MPa), cohesion(SEM), and formed phases (XRD and FT-IR). Therefore, CSP can be a precursor for developing new,sustainable binders.
Matèries (anglès)
Citació
Citació
GIRÓ PALOMA, Jessica, MALDONADO ALAMEDA, Alex, ALFOCEA ROIG, Anna, MAÑOSA BOVER, Jofre, CHIMENOS RIBERA, Josep ma., FORMOSA MITJANS, Joan. Preliminary study of new sustainable, alkali-activated cements using the residual fraction of the glass cullet recycling as precursor. _Applied Sciences_. 2021. Vol. 11, núm. 8, pàgs. 3528. [consulta: 26 de gener de 2026]. ISSN: 2076-3417. [Disponible a: https://hdl.handle.net/2445/176692]