Carregant...
Fitxers
Tipus de document
ArticleVersió
Versió acceptadaData de publicació
Tots els drets reservats
Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/98420
Solid-phase extraction using molecularly imprinted polymer for selective extraction of natural and syntetic estrogens from aqueous samples
Títol de la revista
Director/Tutor
ISSN de la revista
Títol del volum
Recurs relacionat
Resum
A method is proposed for the clean-up and preconcentration of natural and synthetic estrogens from aqueous samples employing molecularly imprinted polymer (MIP) as selective sorbent for solid-phase extraction (SPE). The selectivity of the MIP was checked toward several selected natural and synthetic estrogens such as estrone (E1), 17β-estradiol (β-E2), 17α-estradiol (α-E2), estriol (E3), 17α-ethinylestradiol (EE2), dienestrol (DIES) and diethylstilbestrol (DES). Ultrahigh pressure liquid chromatography (UHPLC) coupled to a TSQ triple quadrupole mass spectrometry (QqQ) was used for analysis of target analytes. The chromatographic separation of the selected compounds was performed in less than 2 min under isocratic conditions. The method was applied to the analysis of estrogens in spiked river and tap water samples. High recoveries (>82%) for estrone, 17β-estradiol, 17α-estradiol, estriol and 17α-ethinylestradiol were obtained. Lower but still satisfactory recoveries (>48%) were achieved for dienestrol and diethylstilbestrol. The method was validated and found to be linear in the range 50-500 ng L-1 with correlation coefficients (R2) greater than 0.995 and repeatability relative standard deviation (RSD) below 8% in all cases. For analysis of 100-ml sample, the method detection limits (LOD) ranged from 4.5 to 9.8 ng L-1 and the limit of quantitation (LOQ) from 14.9 to 32.6 ng L-1. To demonstrate the potential of the MIP obtained, a comparison with commercially available C18 SPE was performed. Molecularly imprinted SPE showed higher recoveries than commercially available C18 SPE for most of the compounds. These results showed the suitability of the MIP-SPE method for the selective extraction of a class of structurally related compounds such as natural and synthetic estrogens.
Matèries (anglès)
Citació
Citació
LUCCI, Paolo, NÚÑEZ BURCIO, Oscar, GALCERÁN HUGUET, M. teresa. Solid-phase extraction using molecularly imprinted polymer for selective extraction of natural and syntetic estrogens from aqueous samples. _Journal of Chromatography A_. 2011. Vol. 1218, núm. 30, pàgs. 4828-4833. [consulta: 2 de gener de 2026]. ISSN: 0021-9673. [Disponible a: https://hdl.handle.net/2445/98420]