Miniatura

Fitxers

682094.pdf (1.46 MB)

Tipus de document

Article

Versió

Versió acceptada

Data de publicació

2018-08-20

Tots els drets reservats

Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/139348

Use of CO as a cleaning tool of highly active surfaces in contact with ionic liquids. Ni deposition on Pt(111) surfaces in IL

Títol de la revista

Autors

Director/Tutor

ISSN de la revista

Títol del volum

Recurs relacionat

https://doi.org/10.1021/acsaem.8b00776

Resum

This work proposes a pretreatment strategy of a flame-annealed Pt(111) single crystal ensuring surface ordering and avoiding surface contamination for experiments in ionic liquid (IL) media,. A room temperature ionic liquid (RTIL) and a Deep Eutectic Solvent (DES) representative of two families of ionic liquids were selected as test electrolytes: The RTIL used was the 1-ethyl-2,3-dimethylimidazolium bis(trifluoromethyl)sulfonylimide ([Emmim][Tf2N]) and the DES was based on the eutectic mixture of choline chloride (ChCl) and urea (1ChCl:2urea molar ratio). The electrode was flame-annealed and cooled down in CO atmosphere until the surface was fully covered by a protective carbon monoxide (CO) layer. Prior to experiments, the removal of CO from the surface was performed by electrochemical oxidation. The CO reactivity on Pt(111) was different depending on the IL nature. While CO is oxidised easily to CO2 in [Emmim][Tf2N], in DES CO remains adsorbed on the substrate and restructures undergoing an order-disorder transition. For both liquids, the proposed method allows obtaining neat blank cyclic voltammograms, demonstrating that the adsorption of CO is a useful tool to protect the high catalytic surfaces such as Pt in contact with ILs. To illustrate the feasibility of the CO treatment in electrochemical work with ILs, the general trends for the modification of Pt(111) single crystal surface with metallic nickel nanostructures on both types of IL was investigated. Nickel electrodeposition on Pt(111) surface was explored in both [Emmim][Tf2N] and DES by using classical electrochemical techniques such as cyclic voltammetry and chronoamperometry, and the deposits were characterized by FE-SEM ,EDS and XPS.

Matèries

Níquel, Transformacions de fase (Física estadística), Solucions iòniques, Galvanoplàstia

Matèries (anglès)

Nickel, Phase transformations (Statistical physics), Ionic solutions, Electroplating

Citació

Col·leccions

Articles publicats en revistes (Ciència dels Materials i Química Física)

Citació

SEBASTIÁN, Paula, TUŁODZIECKI, M., BERNICOLA, M.p., CLIMENT PAYA, Victor jose, GÓMEZ, Elvira, SHAO-HORN, Y., FELIU, Juan m.. Use of CO as a cleaning tool of highly active surfaces in contact with ionic liquids. Ni deposition on Pt(111) surfaces in IL. _ACS Applied Energy Materials_. 2018. Vol. 1, núm. 9, pàgs. 4617-4625. [consulta: 20 de gener de 2026]. ISSN: 2574-0962. [Disponible a: https://hdl.handle.net/2445/139348]

Exportar metadades

JSON - METS

Compartir registre