Amb motiu del tancament d'estiu, la validació de documents es reprendrà a partir del 28 d'agost de 2026. Disculpeu les molèsties.
Con motivo del cierre de verano, la validación de documentos se reanudará a partir del 28 de agosto de 2026. Disculpad las molestias
Due to the summer closure, document validation will resume starting August 28, 2026. We apologize for any inconvenience.

Fitxers

López_Quiñonero_Antonio.pdf (1.69 MB)

Tipus de document

Treball de fi de grau

Data de publicació

2024-06

Llicència de publicació

cc-by-nc-nd (c) López, 2024
Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/228044

High-entropy alloys obtained by thermal spray techniques

Títol de la revista

Autors

Director/Tutor

ISSN de la revista

Títol del volum

Recurs relacionat

Resum

High entropy alloys are known for their excellent mechanical properties, as well as their resistance to wear and corrosion, coupled with notable thermal stability. These characteristics make them an object of current study, due to the revolutionary impact they could have in various industrial sectors, such as aerospace, automotive, electronics and chemicals, among others. One way to use these alloys is through coatings, using thermal spray techniques. The main objective of these processes is to protect metal substrates to increase their durability and save costs, whether economic or energetic. For this purpose, there are currently various thermal spray techniques available and multiple methods to obtain the necessary powders to carry out these processes. This work focuses on the study of FeCrCoMnNi coatings, a high-entropy alloy widely researched. Two thermal spray techniques have been used, Cold Gas Spray (CGS) and High Velocity Oxygen Fuel (HVOF), both known for providing excellent results. The starting material was powder synthesized through High Energy Ball Milling (HEBM). This is a method that can be easily scaled and allows for competitive manufacturing of large quantities, although it may produce characteristics that are inferior compared to other methods. The thermal spray processes have been optimized, and the starting powders have been characterized, which involved studying the particle size distribution, morphology, and microstructure. Subsequently, the coatings were analysed, characterizing their microstructure using SEM, EDS, and XRD, and the hardness, porosity, and thickness values of both coatings were also measured.

Descripció

Treballs Finals de Grau d'Enginyeria de Materials, Facultat de Química, Universitat de Barcelona, Any: 2024, Tutors: Sergi Dosta Parras, Genís Clavé Batlle

Matèries

Aliatges, Entropia, Treballs de fi de grau

Matèries (anglès)

Alloys, Entropy, Bachelor's theses

Citació

Col·leccions

Treballs Finals de Grau (TFG) - Enginyeria de Materials

Citació

LÓPEZ QUIÑONERO, Antonio. High-entropy alloys obtained by thermal spray techniques. [consulted: 6 of August of 2026]. Available at: https://hdl.handle.net/2445/228044

Exportar metadades

JSON - METS

Compartir registre