El CRAI romandrà tancat del 24 de desembre de 2025 al 6 de gener de 2026. La validació de documents es reprendrà a partir del 7 de gener de 2026.
El CRAI permanecerá cerrado del 24 de diciembre de 2025 al 6 de enero de 2026. La validación de documentos se reanudará a partir del 7 de enero de 2026.
From 2025-12-24 to 2026-01-06, the CRAI remain closed and the documents will be validated from 2026-01-07.
 
Carregant...
Miniatura

Tipus de document

Article

Versió

Versió acceptada

Data de publicació

Llicència de publicació

cc-by-nc-nd (c) Elsevier, 2020
Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/173114

Valorisation of water treatment sludge for lightweight aggregate production

Títol de la revista

Director/Tutor

ISSN de la revista

Títol del volum

Resum

Water treatment sludge is an industrial by-product which has recently been classified as a waste by the European Commission. The main goal of this work is to valorise this waste to produce lightweight aggregates. Formulations with sludge substituting expanded clay up to 50 wt% were produced. The physical properties of the lightweight aggregates such as bloating index, density and porosity were studied. The introduction of the sludge without expanding properties, reduced the expandability of the clay and the porosity of the aggregates. The density increased from 0.32 g/cm3 in aggregates without sludge to 1.46 g/cm3 in aggregates with 50 wt% of sludge. It is shown that lightweight aggregates can be produced using mixtures of expanded clay and water treatment sludge, with low substitution percentages (up to 15 wt% of sludge). Aggregates up to 15 wt% of sludge were further studied. The compressive strength increased with sludge wt.%, and the concentrations of heavy metals and metalloids, assessed through leaching tests, were well below the stablished limits. Two preliminary tests of lightweight aggregate concrete were produced: LWAC 1 was formulated with commercial lightweight aggregates and LWAC 2 with aggregates containing 7 wt% of the sludge and commercial lightweight aggregates. The physical, mechanical and thermal properties of LWAC 1 and LWAC 2 were found to be very similar. Our work demonstrates the feasibility in using water treatment sludge as a by-product to produce lightweight aggregates suitable for thermal insulation and lightweight applications.

Citació

Citació

MAÑOSA BOVER, Jofre, FORMOSA MITJANS, Joan, GIRÓ PALOMA, Jessica, MALDONADO ALAMEDA, Alex, QUINA, Margarida j., CHIMENOS RIBERA, Josep ma.. Valorisation of water treatment sludge for lightweight aggregate production. _Construction and Building Materials_. 2020. Vol. 269, núm. 121335. [consulta: 1 de gener de 2026]. ISSN: 0950-0618. [Disponible a: https://hdl.handle.net/2445/173114]

Exportar metadades

JSON - METS

Compartir registre