Carregant...
Fitxers
Tipus de document
ArticleVersió
Versió publicadaData de publicació
Tots els drets reservats
Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/8726
Structural and gas-sensing properties of WO3 nanocrystalline powders obtained by a sol-gel method from tungstic acid
Títol de la revista
Director/Tutor
ISSN de la revista
Títol del volum
Recurs relacionat
Resum
WO3 nanocrystalline powders were obtained from tungstic acid following a sol-gel process. Evolution of structural properties with annealing temperature was studied by X-ray diffraction and Raman spectroscopy. These structural properties were compared with those of WO3 nanopowders obtained by the most common process of pyrolysis of ammonium paratungstate, usually used in gas sensors applications. Sol-gel WO3 showed a high sensor response to NO2 and low response to CO and CH4. The response of these sensor devices was compared with that of WO3 obtained from pyrolysis, showing the latter a worse sensor response to NO2. Influence of operating temperature, humidity, and film thickness on NO2 detection was studied in order to improve the sensing conditions to this gas.
Matèries
Matèries (anglès)
Citació
Citació
JIMENEZ, Ismael, ARBIOL I COBOS, Jordi, CORNET I CALVERAS, Albert, MORANTE I LLEONART, Joan ramon. Structural and gas-sensing properties of WO3 nanocrystalline powders obtained by a sol-gel method from tungstic acid. _IEEE Sensors Journal_. 2002. Vol. 2, núm. 4, pàgs. 329- 335. [consulta: 21 de gener de 2026]. ISSN: 1530-437X. [Disponible a: https://hdl.handle.net/2445/8726]