Document type
ArticleVersion
Accepted versionPublication date
All rights reserved
Please use this identifier to cite or link to this item: https://hdl.handle.net/2445/143970
Bacterial cellulose for increasing barrier properties of paper products
Journal Title
Director/Tutor
Additional contribution
Journal ISSN
Volume Title
Abstract
Bacterial cellulose was combined with wood cellulose papers in order to obtain biomaterials with increased barrier properties. For this purpose, different parameters were assessed: two producing bacterial strains (Komagataeibacter xylinus and Gluconacetobacter sucrofermentans), two paper supports to hold bacterial cellulose (filter paper and eucalyptus paper), two kinds of combined biomaterials (composite and bilayer) and two drying temperatures (90ºC and room temperature). Papers with increased barrier properties (100º of water contact angle, 1220s of water drop test and air permeability ˂1µm (Pa·s)-1) were obtained by the addition of bacterial cellulose to each paper support. However, due to the lower initial barrier properties of filter paper, higher improvements were produced with this paper. In addition, bacterial cellulose provided smoother surfaces with higher gloss without a detrimental effect on physical properties. Higher resistance to water absorption was obtained with K. xylinus possibly explained by its longer size fibers than G. sucrofermentans, as analysed by SEM. Smoothness and gloss were specially increased in the bilayer biomaterial although resistance to air and water were further improved in the composite. In this biomaterial drying at high temperature had a detrimental effect. SEM analysis of the products obtained showed the intimate contact among fibers of bacterial cellulose and wood paper. Results obtained show the contribution of bacterial cellulose to improve the properties of paper and its potential for the design of new added value paper products from biomass.
Related resource
Subject
Subject (English)
Citation
Citation
FILLAT LATORRE, Amanda, et al. Bacterial cellulose for increasing barrier properties of paper products. Cellulose. 2018. Vol. 25, num. 10, pags. 6093-6105. ISSN 0969-0239. [consulted: 7 of October of 2026]. Available at: https://hdl.handle.net/2445/143970