Carregant...
Fitxers
Tipus de document
ArticleVersió
Versió acceptadaData de publicació
Llicència de publicació
Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/134899
Single step electrosynthesis of NiMnGa alloys
Títol de la revista
Director/Tutor
ISSN de la revista
Títol del volum
Recurs relacionat
Resum
An electrochemical synthesis route for NiMnGa alloys is presented. Thin films of NiMnGa were fabricated by single step electrodeposition from aqueous electrolytes using direct current over a range of current densities. By electrolyte tuning, homogeneous films with high Ga and Mn content could be achieved at current densities as high as -400 mA cm-2. Detailed compositional analysis of the alloys showed that growth was homogeneous and oxygen content was minimized. Films plated at very low current densities were found to be nanocrystalline/amorphous. In order to obtain fully crystalline samples, thermal annealing was carried out. Mechanical characterization was assessed by nanoindentation, and the effect of Ga content on mechanical properties was investigated.
Matèries
Matèries (anglès)
Citació
Citació
ÖZKALE, Berna, MUSHTAQ, Fajer, FORNELL, Jordina, CHATZIPIRPIRIDIS, George, MARTIN, Lukas h.j., SORT, Jordi, MULLER JEVENOIS, Carlos, PELLICER VILÀ, Eva m. (eva maria), NELSON, Bradley j., PANÉ, Salvador. Single step electrosynthesis of NiMnGa alloys. _Electrochimica Acta_. 2016. Vol. 204, núm. 199-205. [consulta: 23 de gener de 2026]. ISSN: 0013-4686. [Disponible a: https://hdl.handle.net/2445/134899]