El CRAI romandrà tancat del 24 de desembre de 2025 al 6 de gener de 2026. La validació de documents es reprendrà a partir del 7 de gener de 2026.
El CRAI permanecerá cerrado del 24 de diciembre de 2025 al 6 de enero de 2026. La validación de documentos se reanudará a partir del 7 de enero de 2026.
From 2025-12-24 to 2026-01-06, the CRAI remain closed and the documents will be validated from 2026-01-07.
 
Miniatura

Fitxers

TFG-QU Altimira Esteve, Albert.pdf (712.57 KB)

Tipus de document

Treball de fi de grau

Data de publicació

2021

Llicència de publicació

cc-by-nc-nd (c) Altimira, 2021
Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/179512

Determination of ethyltriphenylphosphonium bromide and butyltriphenylphosphomium chloride in saturated polyester resins by LC-MS

Títol de la revista

Autors

Director/Tutor

ISSN de la revista

Títol del volum

Recurs relacionat

Resum

Powder Coatings are a type of paintings fully applied in the form of dry powder. Thermosseting Polyester Powder Coatings, one of the most used in industry, are based in a saturated polyester resin (with –COOH or –OH functionality group) as binder and crosslinker. In certain cases small amount of catalyst is added in order to the resin to try to achieve an acceptable curing time in baking temperatures. In Arkema Química S.A.U. (Sant Celoni) two specific types of catalyst, TRAP and BTPC (phosphonium salts), are added to the polyester that they synthesizes. The R&D laboratory of the industry requires the analysis of these two catalysts in the resins. The present work aims at developing a method that allows an estimation of the proportion of TRAP and BTPC present in the resins. Several tests have been performed to find the optimal working conditions to analyze the target catalysts by LC-MS. The chromatographic parameters have been optimized, finding the proportions of the appropriate eluents in a gradient method and the best parameters for mass detection using ES ion source. Two blank injections between every single sample analysis were determined as the best way to prevent the carry-over effect of TRAP. The extraction conditions of the catalysts in the resin have also been optimized, obtaining an approximate recovery of 90% for different sets of resin containing TRAP. This study is the basis for future validation of the quantitative method

Descripció

Treballs Finals de Grau de Química, Facultat de Química, Universitat de Barcelona, Any: 2021, Tutores: Anna Rigol Parera, Immaculada Peña Usero

Matèries

Cromatografia de líquids, Espectrometria de masses, Resines de polièster saturat, Treballs de fi de grau

Matèries (anglès)

Liquid chromatography, Mass spectrometry, Saturated polyester resins, Bachelor's theses

Citació

Col·leccions

Treballs Finals de Grau (TFG) - Química

Citació

ALTIMIRA ESTEVE, Albert. Determination of ethyltriphenylphosphonium bromide and butyltriphenylphosphomium chloride in saturated polyester resins by LC-MS. [consulta: 1 de gener de 2026]. [Disponible a: https://hdl.handle.net/2445/179512]

Exportar metadades

JSON - METS

Compartir registre