Fitxers
Tipus de document
ArticleVersió
Versió publicadaData de publicació
Llicència de publicació
Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/231971
3D Printing of Fe27 Al24 Ni22 Cu18 Co9 High-Entropy Alloy Scaffold with Direct Ink Writing for the Degradation of Methyl Red Azo Dye
Títol de la revista
Director/Tutor
Contribució addicional
ISSN de la revista
Títol del volum
Resum
Dyes are emerging pollutants that can be classified in various ways, with azo dyes being among the most persistent in water. These dyes contain conjugated double bonds and azo groups (R–NN–R’), making their degradation in water a significant challenge. In this study, we demonstrate that a high-entropy alloy (HEA) with the composition Fe27Al24Ni22Cu18Co9 can be synthesized using mechanical alloying and subsequently 3D printed using material-extrusion direct ink writing. X-ray diffraction, transmission electron microscopy, and field emission scanning electron microscopy confirmed the synthesis of a new HEA with a face-centered cubic crystal structure after 40 h of mechanical alloying. The degradation properties of the 3D-printed HEA were then investigated for the azo dye known as methyl red, revealing its efficiency at 60 °C in the presence of nitric acid (pH = 1.50), with a degradation time of 28 min and an efficiency of 99%. Moreover, according to the results of high-performance liquid chromatography, we propose the degradation mechanism occurring at the surface of the Fe27Al24Ni22Cu18Co9 HEA that effectively degrades methyl red and leading to the cleavage of the azo bond and generating two different products.
Recurs relacionat
Matèries
Matèries (anglès)
Citació
Citació
RIUS AYRA, Oriol, et al. 3D Printing of Fe27 Al24 Ni22 Cu18 Co9 High-Entropy Alloy Scaffold with Direct Ink Writing for the Degradation of Methyl Red Azo Dye . ACS Omega. 2015. Vol. 10, num. 44. ISSN 2470-1343. [consulted: 9 of October of 2026]. Available at: https://hdl.handle.net/2445/231971