Dijous 11 de juny, el Dipòsit Digital no estarà operatiu de 15:00 a 17:00 h per tasques de manteniment. Disculpeu les molèsties.
El jueves 11 de Junio, el Dipòsit Digital no estará operativo de 15:00 a 17:00 h debido a tareas de mantenimiento. Disculpen las molestias.
Thursday, Jun 11th, the Digital Repository will be unavailable due to a system update.

Document type

Article

Version

Accepted version

Publication date

Publication license

cc-by-nc-nd (c) Elsevier B.V., 2022
Please use this identifier to cite or link to this item: https://hdl.handle.net/2445/193420

Changes in solution turbidity and color during paracetamol removal in laboratory and pilot-scale semicontinuous ozonation reactors

Journal Title

Director/Tutor

Journal ISSN

Volume Title

Abstract

Injecting ozone by means of a venturi device causes an increase in the mass transfer coefficient with respect to gas dissolution through a microdiffuser. Moreover, it was observed that significant turbidity levels are not formed (<1 NTU) when using a microdiffuser, probably due to the relatively high stirring which avoids formation of intermolecular hydrogen bonds. On the contrary, employing a venturi injector led to the production of high turbidity levels in water (up to 20 NTU). This indicates that formation of supramolecular structures causing this turbidity requires the presence of certain facilitating species which are formed through ozone decomposition mechanisms. The maximum ozone transfer takes place when operating at pH0 9.0, that is, when this value is close to the pKa and employing a dose of R = 115 mol O3/mol Pa0. Under these conditions, the degradation of paracetamol generates color, which is attributed to the presence of condensation products from pyrogallol, catechol, resorcinol, acetamide, oxalic acid and 4-aminophenol. Once paracetamol is fully degraded and solution turns colorless, turbidity grows (>20 NTU). This is attributed to formation of high molecular weight structures from 4-aminophenol and oxamide. Operating with large ozone excess (R = 500 mol O3/mol Pa0), the maximum ozone transfer rate is achieved at pH0 = 12.0. Under these conditions, the pollutant is fully removed together with water aromaticity and oxalic acid (able to form linear structures through hydrogen bonding) is detected during color development. Then, turbidity is formed due to cyclic dimer formation from acetic acid.

Subject

Subject (English)

Citation

Citation

VILLOTA, Natalia, et al. Changes in solution turbidity and color during paracetamol removal in laboratory and pilot-scale semicontinuous ozonation reactors. Science of the Total Environment. 2022. Vol. 854, num. 158682. ISSN 0048-9697. [consulted: 11 of June of 2026]. Available at: https://hdl.handle.net/2445/193420

Export metadata

JSON - METS

Share record