Study of the precipitation of secondary phases in duplex and superduplex stainless steel

dc.contributor.authorLlorca i Isern, Núria
dc.contributor.authorLopez-Jimenez, Isabel
dc.contributor.authorLópez-Luque, Héctor
dc.contributor.authorBiezma, María Victoria
dc.contributor.authorRoca, Antoni (Roca Vallmajor)
dc.date.accessioned2020-02-12T14:03:15Z
dc.date.available2020-02-12T14:03:15Z
dc.date.issued2016-11-01
dc.date.updated2020-02-12T14:03:15Z
dc.description.abstractThe aim of this work is to study the precipitation mechanism of the intermetallic phases present in duplex stainless steels (UNS S32205 and UNS S32750), as well as to find out the most suitable method for detecting and analyzing accurately these secondary phases, particularly Sigma-phase, Chi-phase, nitrides and carbides. The samples were characterized after a solution annealing at 1080oC followed by an isothermal treatment at 830oC from 1 min to 9 h, with the purpose of figuring out the mechanism of chi-phase nucleation and nitrides formation in relation with the sigma-phase. The study has two main objectives: 1) to find out the most suitable technique for the detection, identification and quantification of the secondary phases, obtaining the best results with the combination of field emission scanning electron microscopy (FESEM) and backscattered electron detector (BSE) in comparison with the optical microscopy (MO); 2) to study the influence of the chemical composition on the nucleation mechanism of the intermetallic phases. It has been concluded that molybdenum balance content in chi-phase related to sigma phase is close to two, consequently the kinetics of nucleation and growth of these phases is remarkably faster when this alloying element content in the steel is higher. Chromium nitrides and carbides were also observed to precipitate as a result of the heat treatments carried out to the specimen wherein chromium nitrides role is a favorable site for the nucleation of sigma and chi phases.
dc.format.extent6 p.
dc.format.mimetypeapplication/pdf
dc.identifier.idgrec695758
dc.identifier.issn0255-5476
dc.identifier.urihttps://hdl.handle.net/2445/150005
dc.language.isoeng
dc.publisherTrans Tech Publications
dc.relation.isformatofVersió postprint del document publicat a: https://doi.org/10.4028/www.scientific.net/msf.879.2537
dc.relation.ispartofMaterials Science Forum, 2016, vol. 879, p. 2537-2542
dc.relation.urihttps://doi.org/10.4028/www.scientific.net/msf.879.2537
dc.rights(c) Trans Tech Publications, 2016
dc.rights.accessRightsinfo:eu-repo/semantics/openAccess
dc.sourceArticles publicats en revistes (Ciència dels Materials i Química Física)
dc.subject.classificationAcer inoxidable
dc.subject.classificationCarburs
dc.subject.classificationNitrurs
dc.subject.classificationMicroestructura
dc.subject.otherStainless steel
dc.subject.otherCarbides
dc.subject.otherNitrides
dc.subject.otherMicrostructure
dc.titleStudy of the precipitation of secondary phases in duplex and superduplex stainless steel
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/acceptedVersion

Fitxers

Paquet original

Mostrant 1 - 1 de 1
Carregant...
Miniatura
Nom:
695758.pdf
Mida:
624.74 KB
Format:
Adobe Portable Document Format