Carregant...
Tipus de document
Treball de fi de màsterData de publicació
Llicència de publicació
Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/57285
Desenvolupament d’una lluminària multicolor amb LEDs amb sistema de control intel·ligent
Títol de la revista
Autors
Director/Tutor
ISSN de la revista
Títol del volum
Recurs relacionat
Resum
The aim of this project is to develop a system able to reproduce the visible light emitted
by a blackbody in a temperature between 1000 and 8000K using the LED technology. This light
has an ideal color rendering index (CRI), so it can be used for any application. The traditional
and obsolete incandescent light bulbs, acting as a blackbody radiator, offer a very poor
efficiency converting the electricity into light, producing only 10-20lm/W.
The developed smart system is controlled by an Arduino Nano equipped with an ATmega
328 microcontroller. It contains 6 different LED types: red, cyan, green, blue, warm white and
neutral white. This selection of colors covers almost the whole visible band of the
electromagnetic spectrum , allowing to fit the LED global light to the blackbody curve.
The color temperature can be selected through two different graphical user interfaces
(GUI) and they are programmed in MATLAB and App Inventor, a programming language for
Android devices developed by the Massachussets Institute of Technology (MIT). On these
interfaces the user can control the main parameters of the light, such as the color temperature
and the global intensity. The intensity of the individual LED, the luminous efficacy and the CRI
of each selection is given for informational purposes. Furthermore, the GUI developed in
MATLAB shows a graphic with the color diagram and the planckian locus plotted inside,
changing the position of a pointer for each color temperature selected. Moreover, the MATLAB
GUI requires a USB connexion while the Android GUI needs the bluetooth technology.
This microcontroller used can only provide 40mA of electrical intensity per pin. It causes
several restrictions on the prototype, resulting in a low luminous flux (10-30lm) and a greater
eficiency (30-50lm/W) than a halogen light bulb but smaller than a CFL. These issues can be
solved changing the circuit, adding transistors and an external power source able to provide
700mA per pin, the nominal intensity of the used LED. This improvement increases the
efficiency to values between 50 and 60lm/W, the typical performance of the CFL light bulb.
Finally, the economical study shows that the cost of the prototype is approximately 180€,
but an industrial process can reduce the price more than 130€, giving a final cost of less than
50€ per unit. This can be archieved due to the reduction of the connections board cost and the
use of the microcontroller instead of the entire Arduino.
Descripció
Treballs Finals del Màster d’Energies Renovables i Sostenibilitat Energètica, Facultat de Física, Universitat de Barcelona, Curs: 2013-2014, Tutor: Blas Garrido
Matèries
Matèries (anglès)
Citació
Citació
HUGUET FERRAN, Adrià. Desenvolupament d’una lluminària multicolor amb LEDs amb sistema de control intel·ligent. [consulta: 20 de gener de 2026]. [Disponible a: https://hdl.handle.net/2445/57285]