Assessment of 3D Printing Technologies for Millimeter Wave Reflectors

Vista senzilla d'ítem
dc.contributor.authorRomeu, Jordi
dc.contributor.authorBlanch, Sebastian
dc.contributor.authorVidal Martínez, Neus
dc.contributor.authorLópez Villegas, José María
dc.contributor.authorAguasca, Albert
dc.date.accessioned2019-06-19T09:51:40Z
dc.date.available2019-06-19T09:51:40Z
dc.date.issued2018-07-20
dc.date.updated2019-06-19T09:51:40Z
dc.description.abstractThree different 3D printing technologies: Stereolithography (SLA), Fused Deposition Modeling (FDM) and HP Multi Jet Fusion Technology (MJF) are compared to build a parabolic reflector operating at 100 GHz. Fabrication tolerance and surface roughness before and after metallization are accurately measured. The performance of the reflectors is measured in the near field and its performance is compared against an optical grade reflector. In this way the performance of the final product is thoroughly assessed
dc.format.extent4 p.
dc.format.mimetypeapplication/pdf
dc.identifier.idgrec682422
dc.identifier.issn1536-1225
dc.identifier.urihttps://hdl.handle.net/2445/135406
dc.language.isoeng
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)
dc.relation.isformatofVersió postprint del document publicat a: https://doi.org/10.1109/LAWP.2018.2857856
dc.relation.ispartofIEEE Antennas and Wireless Propagation Letters, 2018, vol. 17, num. 11, p. 2061-2064
dc.relation.urihttps://doi.org/10.1109/LAWP.2018.2857856
dc.rights(c) Institute of Electrical and Electronics Engineers (IEEE), 2018
dc.rights.accessRightsinfo:eu-repo/semantics/openAccess
dc.sourceArticles publicats en revistes (Enginyeria Electrònica i Biomèdica)
dc.subject.classificationImpressió 3D
dc.subject.classificationAntenes (Electrònica)
dc.subject.classificationOnes electromagnètiques
dc.subject.otherThree-dimensional printing
dc.subject.otherAntennas (Electronics)
dc.subject.otherElectromagnetic waves
dc.titleAssessment of 3D Printing Technologies for Millimeter Wave Reflectors
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/acceptedVersion

Fitxers

Paquet original

Mostrant 1 - 1 de 1
Miniatura
Nom:
682422.pdf
Mida:
833.63 KB
Format:
Adobe Portable Document Format
Descarregar

Col·leccions

Articles publicats en revistes (Enginyeria Electrònica i Biomèdica)