Carregant...
Fitxers
Tipus de document
ArticleVersió
Versió acceptadaData de publicació
Tots els drets reservats
Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/67162
Influence of Cold Gas Spray process conditions on the microstructure of Fe-based amorphous coatings
Títol de la revista
Director/Tutor
ISSN de la revista
Títol del volum
Recurs relacionat
Resum
Fe-based amorphous metallic coatings were prepared by Cold Gas Spray process. Through this study, the effects of the process conditions such as spraying distance, gas pressure and temperature on the microstructure of as-sprayed coatings are evaluated. Microstructural studies show that the coatings can present a densely layered structure with porosity below 0.5% and thickness around 800 μm depending on the process conditions. Precipitation of nanocrystals in as-sprayed coatings is observed and present results show its dependence on the thermal and kinetic energy implicated in the process. In general, when gas temperature and pressure decreased, in the studied range, coatings displayed a dense and amorphous structure.
Matèries
Matèries (anglès)
Citació
Citació
HENAO, John, CONCUSTELL I FARGAS, Amadeu, GARCÍA CANO, Irene, CINCA I LUIS, Núria, DOSTA PARRAS, Sergi, GUILEMANY, J. m. (josé maría). Influence of Cold Gas Spray process conditions on the microstructure of Fe-based amorphous coatings. _Journal of Alloys and Compounds_. 2014. Vol. 622, núm. 995-999. [consulta: 21 de gener de 2026]. ISSN: 0925-8388. [Disponible a: https://hdl.handle.net/2445/67162]