Amb motiu del tancament d'estiu, la validació de documents es reprendrà a partir del 28 d'agost de 2026. Disculpeu les molèsties.
Con motivo del cierre de verano, la validación de documentos se reanudará a partir del 28 de agosto de 2026. Disculpad las molestias
Due to the summer closure, document validation will resume starting August 28, 2026. We apologize for any inconvenience.

Tipus de document

Article

Data de publicació

Tots els drets reservats

Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/25057

Heat pulse line-source method to determine thermal conductivity of consolidated rocks

Títol de la revista

Director/Tutor

ISSN de la revista

Títol del volum

Resum

An instrument designed to measure thermal conductivity of consolidated rocks, dry or saturated, using a transient method is presented. The instrument measures relative values of the thermal conductivity, and it needs calibration to obtain absolute values. The device can be used as heat pulse line source and as continuous heat line source. Two parameters to determine thermal conductivity are proposed: TMAX, in heat pulse line source, and SLOPE, in continuous heat line source. Its performance is better, and the operation simpler, in heat pulse line-source mode with a measuring time of 170 s and a reproducibility better than 2.5%. The sample preparation is very simple on both modes. The performance has been tested with a set of ten rocks with thermal conductivity values between 1.4 and 5.2 W m¿1 K¿1 which covers the usual range for consolidated rocks.

Citació

Citació

FERNÁNDEZ I ORTIGA, Manel, BANDA, E. (Enric) and ROJAS BLASI, Emilio. Heat pulse line-source method to determine thermal conductivity of consolidated rocks. Review of Scientific Instruments. 1986. Vol. 57, num. 11. ISSN 0034-6748. [consulted: 3 of August of 2026]. Available at: https://hdl.handle.net/2445/25057

Exportar metadades

JSON - METS

Compartir registre