Photoluminescence from carbon structures grown by inductively coupled plasma chemical vapor deposition

dc.contributor.authorMusheghyan Avetisyan, Arevik
dc.contributor.authorGüell Vilà, Frank
dc.contributor.authorMartínez-Alanis, Paulina R.
dc.contributor.authorAmade Rovira, Roger
dc.contributor.authorMartí González, Joan
dc.contributor.authorBertrán Serra, Enric
dc.date.accessioned2020-06-08T14:02:22Z
dc.date.available2020-06-08T14:02:22Z
dc.date.issued2020-03
dc.date.updated2020-06-08T14:02:22Z
dc.description.abstractCarbon micro/nanostructures were grown by inductively coupled plasma chemical vapor deposition (ICP-CVD) at low pressure into a tubular reactor under pure methane and using substrates of SAE 304 stainless steel. The samples show diverse structures and properties depending on the position inside the quartz tube, due to the different temperatures and environmental conditions. In this experiment, the authors have obtained structures with different scales (micro and nano), depending on the growing temperature and the position inside the reactor. Carbon microstructures were obtained on the extreme parts of the tubular reactor at low temperatures. In contrast, carbon nanostructures appeared after the plasma resonator at temperatures higher than 700 degrees C. X-ray photoelectron spectroscopy and Fourier transform infrared spectrometry evidenced functional groups with hydrogen and oxygen atoms except for nanostructures at 750 degrees C showing vertical carbon nanowalls with more than ten crystalline layers, such as it was verified by field emission SEM, TEM, and Raman shift spectroscopy. An intense photoluminescence in the visible range was revealed from the samples excited by laser (325nm), except the nanowall samples, which exhibited a poor photoluminescence. The purpose of this work is to study the photoluminescence of carbon structures produced by ICP-CVD and to evidence the role of hydrogen and oxygen functional groups with hydrogen and oxygen atoms. The understanding of these processes provides additional criteria for designing new materials based on carbon, which is environmentally friendly, for application to luminescent devices.
dc.format.mimetypeapplication/pdf
dc.identifier.idgrec701395
dc.identifier.issn0734-2101
dc.identifier.urihttps://hdl.handle.net/2445/164794
dc.language.isoeng
dc.publisherAmerican Vacuum Society
dc.relation.isformatofReproducció del document publicat a: https://doi.org/10.1116/1.5140415
dc.relation.ispartofJournal of Vacuum Science & Technology A, 2020, vol. 38, num. 2, p. 023405
dc.relation.urihttps://doi.org/10.1116/1.5140415
dc.rightscc by (c) Musheghyan Avetisyan et al., 2020
dc.rights.accessRightsinfo:eu-repo/semantics/openAccess
dc.rights.urihttp://creativecommons.org/licenses/by/3.0/es/
dc.sourceArticles publicats en revistes (Física Aplicada)
dc.subject.classificationGrafè
dc.subject.classificationMaterials nanoestructurats
dc.subject.classificationLuminescència
dc.subject.otherGraphene
dc.subject.otherNanostructured materials
dc.subject.otherLuminescence
dc.titlePhotoluminescence from carbon structures grown by inductively coupled plasma chemical vapor deposition
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion

Fitxers

Paquet original

Mostrant 1 - 1 de 1
Carregant...
Miniatura
Nom:
701395.pdf
Mida:
4.88 MB
Format:
Adobe Portable Document Format