Carregant...
Fitxers
Tipus de document
ArticleVersió
Versió acceptadaData de publicació
Llicència de publicació
Si us plau utilitzeu sempre aquest identificador per citar o enllaçar aquest document: https://hdl.handle.net/2445/125567
Determination of Pd(II) using an antimony film coated on a screen-printed electrode by adsorptive stripping voltammetry
Títol de la revista
Director/Tutor
ISSN de la revista
Títol del volum
Recurs relacionat
Resum
The use of an antimony film coated on a screen-printed carbon electrode (ex-situ SbSPCE) is proposed for the determination of Pd(II) at ppb levels in natural samples by adsorptive stripping voltammetry using dimethylglyoxime as chelating agent. Ex-situ SbSPCE produces a better analytical performance as compared to a commercially sputtered bismuth screen-printed electrode (BispSPE). The detection and quantification limits were 2.7 and 9.0 µg L-1 respectively with a good linear behaviour in the wide examined concentration range (from 1 µg L-1 up to 100.0 µg L1, R2= 0.998). The proposed ex-situ SbSPCE showed an excellent repeatability with a relative standard deviation of 0.5 % for ten successive measurements and a very good reproducibility (1.6 % for three different ex-situ SbSPCE units within series of ten repetitive assays). Moreover, the ex-situ SbSPCE was successfully applied for the determination of low concentration levels of Pd(II) in spiked tap water with a very high reproducibility (0.2 %) and providing equivalent results to those achieved by ICP-MS measurements
Matèries
Matèries (anglès)
Citació
Citació
PÉREZ RÀFOLS, Clara, TRECHERA, Pedro, SERRANO I PLANA, Núria, DÍAZ CRUZ, José manuel, ARIÑO BLASCO, Cristina, ESTEBAN I CORTADA, Miquel. Determination of Pd(II) using an antimony film coated on a screen-printed electrode by adsorptive stripping voltammetry. _Talanta_. 2017. Vol. 167, núm. 1-7. [consulta: 29 de gener de 2026]. ISSN: 0039-9140. [Disponible a: https://hdl.handle.net/2445/125567]