Amb motiu del tancament d'estiu, la validació de documents es reprendrà a partir del 28 d'agost de 2026. Disculpeu les molèsties.
Con motivo del cierre de verano, la validación de documentos se reanudará a partir del 28 de agosto de 2026. Disculpad las molestias
Due to the summer closure, document validation will resume starting August 28, 2026. We apologize for any inconvenience.

Document type

Article

Version

Accepted version

Publication date

All rights reserved

Please use this identifier to cite or link to this item: https://hdl.handle.net/2445/208242

“In-plane” site-specific FIB lamella extraction from deformed magnetite and the investigation of low angle grain boundaries under TEM

Journal Title

Director/Tutor

Journal ISSN

Volume Title

Abstract

In this study a modus operandi to investigate site-specific nanostructures in thin films (lamellae) excavated “in-plane” across (sub)grain boundaries is presented. This is done by discussing the case of a magnetite grain hosted in a thin section of banded iron formation (Norway) that is prepared parallel to the kinematic reference frame (XZ section of the strain ellipsoid). SEM-EBSD analysis reveal that the magnetite grains do not develop a strong crystallographic preferred orientation, although individual grains are strained and show evidence of intracrystalline deformation in form of low angle grain boundaries (LAGB's). Two “in-plane” lamellae using focused ion beam (FIB) technique are excavated from a magnetite grain in the kinematic reference frame, and nanostructures are studied along three LAGB's using high resolution transmission electron microscopy imaging followed by Fourier transformation (FT), inverse FT and estimation of dislocation densities. Our data establish an empirical relationship for the studied LAGBs, namely, the smaller the angle between LAGB and X-direction, the larger are the shear strain and dislocation density. This relationship is validated from numerical simulations of viscoplastic deformation and dynamic recrystallisation of polycrystalline aggregates of halite, which is also a cubic mineral analogous to magnetite. In addition to the site-specific “in-plane” FIB lamella information, this study also shows that in a deformed mineral the different orientations of the LAGB compared to the principal strain axes show a different dislocation density. This approach of full tracking of the extension direction (X) from the macroscopic to the nano-scale could play an important role in forward modelling of microstructure evolution in future studies.

Citation

Citation

MAMTANI, M.A., et al. “In-plane” site-specific FIB lamella extraction from deformed magnetite and the investigation of low angle grain boundaries under TEM. Journal of Structural Geology. 2023. Vol. 174. ISSN 0191-8141. [consulted: 9 of August of 2026]. Available at: https://hdl.handle.net/2445/208242

Export metadata

JSON - METS

Share record