Amb motiu del tancament d'estiu, la validació de documents es reprendrà a partir del 28 d'agost de 2026. Disculpeu les molèsties.
Con motivo del cierre de verano, la validación de documentos se reanudará a partir del 28 de agosto de 2026. Disculpad las molestias
Due to the summer closure, document validation will resume starting August 28, 2026. We apologize for any inconvenience.

Document type

Article

Version

Published version

Publication date

Publication license

cc-by-sa (c) Roma, Maria et al., 2018
Please use this identifier to cite or link to this item: https://hdl.handle.net/2445/147979

Weld kinematics of synrift salt during basement-involved extension and subsequent inversion: Results from analog models

Journal Title

Director/Tutor

Journal ISSN

Volume Title

Abstract

Scaled analog models based on extensional basins with synrift salt show how basement topography exerts a control factor on weld kinematics during the extension and inversion phases. In the case of basement-involved extension, syn-rift salt thickness differences may lead to variable degrees of extensional decoupling between basement topography and overburden, which in turn have a strong impact on the development of salt structures. With ongoing extension and after welding, the basin kinematics evolves toward a coupled deformation style. The basin architecture of our experimental results record the halokinetic activity related to growing diapirs and the timing of weld formation during extension. Moreover, the structures that result from any subsequent inversion of these basins strongly depends on the inherited welds and salt structures. While those basins are uplifted, the main contractional deformation during inversion is absorbed by the pre-existing salt structures, whose are squeezed developing secondary welds that often evolve into thrust welds. The analysis of our analog models shows that shortening of diapirs is favored by: 1) basement topography changes that induce reactivation of primary welds as thrust welds; 2) reactivation of the salt unit as a contractional detachment; and 3) synkinematic sedimentation during basin inversion. Finally in this article we also compare two natural examples from the southern North Sea that highlight deformation patterns very similar to those observed in our analog models.

Subject (English)

Citation

Citation

ROMA, Maria, et al. Weld kinematics of synrift salt during basement-involved extension and subsequent inversion: Results from analog models. Geologica Acta. 2018. Vol. 16, num. 4, pags. 391-410. ISSN 1695-6133. [consulted: 8 of August of 2026]. Available at: https://hdl.handle.net/2445/147979

Export metadata

JSON - METS

Share record